Tecno P5 shows PMT of the rom has changed, you need to download on SP flash tool p .
Tecno P5 shows PMT of the rom has changed, you need to download on SP flash tool p .
(10-05-2016, 07:18 PM)mensa Please I saw tecno p5 new OS variant 1, 2 and 3.i don't know the differences between them so which one shall I choose?
Again, before I flashed the old tecno p5 stock rom from hovatek, I had already flashed an old tecno p5 custom rom which had faults with the baseball but it flashed alright. I don't know why I can't flash the old tecno p5 stock rom from hovatek.
I am saying this because if the phone is designated to flash the tecno p5 new OS, why did the custom rom for the old tecno p5 work? My phone never bricked. I understand that flashing the new OS to an old tecno p5 will brick it, likewise, flashing the old OS to a new tecno p5 will cause the same incident
In any case, the phone as always boots to a white tecno logo which immediately changes to blue and after 3-6 seconds, boots to the home screen.
I am looking up to you because you are my guide. My phone is a mess right now so please help me out.
Please help with the type of variant to choose if I should flash the new OS.
Thank you
(14-05-2016, 10:23 PM)mensa Please, the variant 1 and 2 cannot be extracted but was able to flash the variant 3 and it flashed but I wonder if that is a stock rom.
I observed these:
First, the imei was invalid when I entered *#06# on the dialpad meaning there is something wrong with the baseband and MPOB_001 file.
Secondly. This app: uber sync for facebook is part of the system app but the stock rom I was previously using before flashing did not have such an app.
Last but not least, the network was not available after flashing the variant 3.
I don't know if that is a stock rom but not deigned for my phone or something. I have been trying to extract the variant 2 and 3 but that is not extracting. So far, the variant 3 is what I have used and that gave me those faedbacks.
Please what should I do?
(17-05-2016, 01:31 PM)mensa The baseband is available but when I entered *#06#, it showed IMEI invalid. Please isnt a stock rom suppose to have this intact without configuring any more settings after lashing?
(18-05-2016, 07:53 PM)mensa I went through the info and I used the first option to create a new MPOB_001 file and it fixed the imei invalid problem.
But something else has happened. At first when I had not flashed the phone, I was able to tune the phone to only accept 3G networks but right now, after solving the imei problem: the phone can only access 2G networks. When I tune it to 3G only, the network disconnects, no network signal is seen and no service is seen also at the notification bar.
Please what is causing this?