05-13-2016, 10:12 AM
Please, please help me!
I have MIJUE T200, MTK 6735, 5.1 lolipop, and irritating problem with the lack of space on the system partiton (only 2GB, the rest up to 16GB is "unusable"). My desire is to root phone and resize partitions to say 8 + 4GB.
I immediately note You that I carefully read the following threads:
All things I tried were with open developer options, allow the bootloader to be unlocked and USB debugging. Also all aplications I run as administrator.
My problems are:
When I install MTK & Vcom Drivers (any and/or all of them), in the device manager I get a message with a yellow triangle, and after installing each driver, it says the driver could not start (error code 10). For installation drivers, I allowed on my WINDOWS7/32bit install them when asked about it. I read that this is a common appearance, but the problem become when I tried to create a scatter file from my phone with MTK Droid tools v2.5.3. It could not recognize/read my phone (information). I tried with the recommended PdaNetA4190.exe drivers, same problem. Also, I could not download MTK Droid Tools v2.5.3d, because something is wrong with the link. Could You give me new/working one to try with it?
In fact, I think it's important to make bkp of my original scatter file, and after that bkp (read back) of my original ROM before flashing phone with "TWRP for Mijue T200 ported by Team Hovatek". I afraid of "bricking" phone, so I would like to have possibility of return to my original image.
Do You think maybe I should just try to flash phone with recovery.img from "TWRP for Mijue T200 ported by Team Hovatek", in combination with the scatter file from swimmer3000 (MT6735_Android_scatter_T200_2.txt)? Would it fully fit to my phone? Would it be wise to do it without bkp of my original scatter and ROM?
I was thinking about readback my ROM using SP flash tool, but I do not have my scatter file. Could I use scatter from swimmer3000 and make bkp of my ROM with it? If so, what to write for a start address and length (in hex)? What to write for bkp entire ROM (ROM_1) if I want to bkp it too? Would it fully fit to my phone?
Finaly: I could not make my own scatter file and bkp my ROM, I'm not entirely sure of the drivers, but do not dare to make a flash without bkp.
Lot of questions, I know ... but PLEASE tell me the easiest way to root and resize my phone partition, because that lack of space is already terrifying.
So, PLEASE give me a hand in way step-by-step instructions and I will certainly appreciate it.
Any help would be great, and if You need any additional info about phone or something else, please just ask.
Tnx in advance for Your efforts.