Hovatek Forum DEVELOPMENT Android [Tutorial] How to change boot logo on an MTK phone (NOT bootanimation)
Try our Online TWRP Builder..its free!
Can't login? Please, reset your password.


[Tutorial] How to change boot logo on an MTK phone (NOT bootanimation)

[Tutorial] How to change boot logo on an MTK phone (NOT bootanimation)

Pages (3): 1 2 3 Next
X3non
X3non
X3non
Recognized Contributor
22,062
07-02-2015, 04:24 AM
#1



This guide explain how to change Boot logo. BOOT LOGO here refers to the very first image that displays just before the bootanimation. In most cases it's usually the phone manufacturer brand name

Requirements



How to Change BootLogo on an MTK Phone


The steps below explain how to change bootLogo on an MTK Phone

See the video tutorial below or @ https://youtu.be/FuTEOcEbJfw

  1. Extract the logobuilder and run logobuilder.exe

    [Image: how-to-change-boot-logo-on-mtk-device-1.png]

  2. Click on "create new project"
  3. Locate and select your logo.bin file
  4. Select the new project folder
  5. For certain logo.bin files (especially those from higher android versions), you might be prompted with an "Image size" window, simply use the scroll bar on the right hand side to find your screen-size (the image will be crystal clear as compared to the other distorted images) before clicking OK

    [Image: how-to-change-boot-logo-on-mtk-device-3.jpg]

  6. Logobuilder will auto. extract the contents of logo.bin file

    [Image: how-to-change-boot-logo-on-mtk-device-2.png]

  7. Some images might still look distorted, simply click on the image dimension (e.g of image dimension is 10 x 10) just below the image itself and the "image size" window will be launched, you can then move the vertical slider till you find the right clear image then click Ok
  8. Minimise the logobuilder
  9. Now visit the project's folder and change/edit the bootlogo image. in my case its the first and last image
  10. If you are changing the image remember to resize your new image to the exact screen size of the old image
  11. Go back to logobuilder and click on "MAKE"
  12. You should get two files inside the project's folder.
  13. logo.bin which can be flashed using SPft and update.zip which can be flashed using a custom recovery.


Important Notice
  • This tool only works for MTK phones
  • This tool can only modify logo.bin file but can't flash it; You must flash the update.zip using a custom recovery or flash the new logo.bin using SP flash tool or Miracle Box depending on how you obtained the logo.bin
  • If you want to change bootlogo on a Spreadtrum Phone, then see How to change the bootlogo on an SPD Phone
  • This tool was created by ankadnikov of XDA so credits goes to him for the tool
This post was last modified: 22-12-2023, 12:40 AM by hovatek.
Attached Files
.zip
update.zip
Size: 395.37 KB / Downloads: 144
.png
1.PNG
Size: 24.29 KB / Downloads: 267
.zip
Tecno H6-default-update.zip
Size: 303 KB / Downloads: 99
silvery
silvery
silvery
Newbie
3
18-02-2015, 01:05 AM
#2
please i changed the logo successfully.....but i wanna port back to the smart life logo.... pls i need a flashable zip
X3non
X3non
X3non
Recognized Contributor
22,062
18-02-2015, 09:25 AM
#3
(18-02-2015, 01:05 AM)silvery please i changed the logo successfully.....but i wanna port back to the smart life logo.... pls i need a flashable zip

check the first post for  h6's default smartlife bootlogo
bradreus
bradreus
bradreus
Junior Member
34
07-04-2015, 09:30 AM
#4
This is wickedly amazing.

Thumbs up X3non
kay4dam69
kay4dam69
kay4dam69
Senior Member
389
10-04-2015, 11:34 PM
#5



do i stil nid to install cwm recovery on my tecno p5 if necesary because i have my mtk backup already.
X3non
X3non
X3non
Recognized Contributor
22,062
11-04-2015, 10:33 AM
#6
(10-04-2015, 11:34 PM)kay4dam69 do i stil nid to install cwm recovery on my tecno p5 if necesary because i have my mtk backup already.

yes. if you dont wish to flash created logo.bin through spft. its simpler to flash the created update.zip through cwm
shawtypresh
shawtypresh
shawtypresh
Newbie
1
19-03-2016, 09:21 AM
#7
(11-04-2015, 10:33 AM)X3non
(10-04-2015, 11:34 PM)kay4dam69 do i stil nid to install cwm recovery on my tecno p5 if necesary because i have my mtk backup already.

yes. if you dont wish to flash created logo.bin through spft. its simpler to flash the created update.zip through cwm
Samwanjeri
Samwanjeri
Samwanjeri
Senior Member
342
19-03-2016, 03:11 PM
#8
Nice one although resolution beyond 480x854 not supported eg hot 2 720x1280

Sent from my Infinix X510 using Hovatek mobile
X3non
X3non
X3non
Recognized Contributor
22,062
20-03-2016, 06:12 AM
#9
(19-03-2016, 03:11 PM)Samwanjeri Nice one although resolution beyond 480x854 not supported eg hot 2 720x1280

Sent from my Infinix X510 using Hovatek mobile

* use the logo.bin for your device you can get it from your mtk backup

the one posted here is meant for tecno h6
Samwanjeri
Samwanjeri
Samwanjeri
Senior Member
342
20-03-2016, 06:27 AM
#10



I've tried on tecno m6 it perfectly worked. On hot 2 after putting the logo bin the program is unable to generate images just try

Sent from my Infinix X510 using Tapatalk
Pages (3): 1 2 3 Next
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)
YtWhTl
live chat
whatsapp telegram instagram