Hi, Guest! Login / Register




Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

TECNO M3 flashing problem

#31

(06-09-2016, 10:06 PM)Rhazak Wrote: I use different pc and follow the procedure but still getting d same error

two possibilities:
1. battery is bad or drained
2. phone's USB port is faulty.

When you connect the phone to PC, what does it get detected as in Device Manager?


Reply
#32
Mediatek
Reply
#33
(06-11-2016, 10:51 AM)Rhazak Wrote: Mediatek

I doubt it'll show just Mediatek. I need the full name
Reply
#34
(This post was last modified: 06-12-2016, 12:43 AM by mensa. )
(06-09-2016, 10:06 PM)Rhazak Wrote: I use different pc and follow the procedure but still getting d same error

Auto USB disconnection?? When you try charging the phone using any of the USB cables, does it disconnect automatically or???

Sent from my Infinix NOTE 2 using Hovatek mobile
Reply
#35
Wen I charge d fone using usb cable it disconnect automatically
(Mediatek DA VCOM PORT(COM33)
Reply
#36
(06-12-2016, 12:22 PM)Rhazak Wrote: Wen I charge d fone using usb cable it disconnect automatically
(Mediatek DA VCOM PORT(COM33)

Then the problem is with the phone. The phone's USB port is weak. I will suggest getting the board changed or you can hold the USB tight to the phone and keep on holding till flashing is complete.
Note: if holding and by any reason whatsoever your hand shiver and the USB disconnects with flash incomplete, you can encounter the risk of bricking your phone.

Sent from my Infinix NOTE 2 using Hovatek mobile
Reply
#37
(06-12-2016, 12:22 PM)Rhazak Wrote: Wen I charge d fone using usb cable it disconnect automatically
(Mediatek DA VCOM PORT(COM33)

have you tried the connection-disconnection fix @ https://forum.hovatek.com/thread-439.html
Reply
#38
Hav already try dat but still d same
Reply
#39
(06-14-2016, 07:06 AM)Rhazak Wrote: Hav already try dat but still d same
Have already tried which one exactly?
Reply
#40
(06-14-2016, 07:06 AM)Rhazak Wrote: Hav already try dat but still d same

Consider changing the phone's USB  port. Assuming the battery is well charged
Reply










Users browsing this thread:
1 Guest(s)