Hovatek Forum MOBILE Android bricked zopo zp980 6589T 2GB/32GB
Can't login? Please, reset your password.
Hovatek is recruiting! Apply Now


bricked zopo zp980 6589T 2GB/32GB

bricked zopo zp980 6589T 2GB/32GB

Pages (2): 1 2 Next
bigtoy44
bigtoy44
bigtoy44
Junior Member
18
07-06-2016, 01:04 AM
#1



Got this phone used not working. Tried to flash firmware with SPFT.It never goes past the red bar at 100%. Error 4001 If I plug it into the computer while holding the volume down button it just shows up as MTK usb port (com 21). Installed MediaTek preloader drivers. they show up as MediaTek preloader usb Vcom port (21). I would greatly appreciate and help. Thank you.
matybazz
matybazz
matybazz
Senior Member
2,289
07-06-2016, 02:09 PM
#2
(07-06-2016, 01:04 AM)bigtoy44 Got this phone used not working. Tried to flash firmware with SPFT.It never goes past the red bar at 100%. Error 4001 If I plug it into the computer while holding the volume down button it just shows up as MTK usb port (com 21). Installed MediaTek preloader drivers. they show up as MediaTek preloader usb Vcom port (21). I would greatly appreciate and help. Thank you.

Try a differ usb or port also use a higher version of spflashtool https://www.hovatek.com/forum/thread-159.html
bigtoy44
bigtoy44
bigtoy44
Junior Member
18
07-06-2016, 04:50 PM
#3
(07-06-2016, 02:09 PM)matybazz
(07-06-2016, 01:04 AM)bigtoy44 Got this phone used not working. Tried to flash firmware with SPFT.It never goes past the red bar at 100%. Error 4001 If I plug it into the computer while holding the volume down button it just shows up as MTK usb port (com 21). Installed MediaTek preloader drivers. they show up as MediaTek preloader usb Vcom port (21). I would greatly appreciate and help. Thank you.

Try a differ usb or port also use a higher version of spflashtool https://www.hovatek.com/forum/thread-159.html

I have tried different usb ports,cables,computers and versions of sp flash tool. Same result.Open to any ideas.
matybazz
matybazz
matybazz
Senior Member
2,289
07-06-2016, 06:44 PM
#4
(07-06-2016, 04:50 PM)bigtoy44 I have tried different usb ports,cables,computers and versions of sp flash tool. Same result.Open to any ideas.

* Run SP flash tool as Admin
* Ensure to install the correct drivers (see https://www.hovatek.com/forum/thread-440.html )
* Ensure the phone is switched off with a charged battery inside when connecting to the PC for flashing
bigtoy44
bigtoy44
bigtoy44
Junior Member
18
07-06-2016, 11:47 PM
#5



(07-06-2016, 06:44 PM)matybazz
(07-06-2016, 04:50 PM)bigtoy44 I have tried different usb ports,cables,computers and versions of sp flash tool. Same result.Open to any ideas.

* Run SP flash tool as Admin
* Ensure to install the correct drivers (see https://www.hovatek.com/forum/thread-440.html )
* Ensure the phone is switched off with a charged battery inside when connecting to the PC for flashing

I have done all of those, the flash tool only shows red bar 100% and then times out.
bigtoy44
bigtoy44
bigtoy44
Junior Member
18
08-06-2016, 12:13 AM
#6
screenshot
Attached Files
.png
Capture.PNG
Size: 150.11 KB / Downloads: 11
.png
Capture 2.PNG
Size: 134.46 KB / Downloads: 8
matybazz
matybazz
matybazz
Senior Member
2,289
08-06-2016, 10:19 AM
#7
(08-06-2016, 12:13 AM)bigtoy44 screenshot

Then theres something wrong with the device.. Have your usb port checked on your phone
hovatek
hovatek
hovatek
Administrator
49,570
09-06-2016, 06:09 PM
#8
(08-06-2016, 12:13 AM)bigtoy44 screenshot

try using firmware upgrade and download only

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.
bigtoy44
bigtoy44
bigtoy44
Junior Member
18
11-09-2016, 01:21 AM
#9
(08-06-2016, 10:19 AM)matybazz
(08-06-2016, 12:13 AM)bigtoy44 screenshot

Then theres something wrong with the device..  Have your usb port checked on your phone

replaced the usb port with a new one. the phone is still recognized as Mediatek usb port, when holding volume up and down and plugging in the usb cable.
hovatek
hovatek
hovatek
Administrator
49,570
11-09-2016, 06:23 PM
#10



(11-09-2016, 01:21 AM)bigtoy44 replaced the usb port with a new one. the phone is still recognized as Mediatek usb port, when holding volume up and down and plugging in the usb cable.

Right-click this Mediatek USb Port item and select Upgrade driver. Follow the connection-disconnection fix @ https://www.hovatek.com/forum/thread-439.html from this point

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.
Pages (2): 1 2 Next
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)
YtWhTl
live chat
whatsapp telegram instagram