Hi, Guest! Login / Register




Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

[Please help] Zopo C2 hard bricked, please help

#1
Sad 

Hi all
i have a Zopo C2 with 4GB rom, sadly after a wrong rom flash, it is completely dead, my win7 pc only recognize it as mtk usb com port, i already tried to flash the stock rom i downloaded from the manufacturer website but whatever i do SP flashtools always terminate with an ENABLE DRAM FAIL ERR, i think because of the wrong preloader previously flashed, i already tried to flash the preloader only and i always get the same error, also done the flash procedure with different flashtool versions,
no meta mode seems to be available, i am stuck and quite desperate, please help me


Reply
#2
(06-09-2016, 09:37 AM)Brainbooster Wrote: Hi all
i have a Zopo C2 with 4GB rom, sadly after a wrong rom flash, it is completely dead, my win7 pc only recognize it as mtk usb com port, i already tried to flash the stock rom i downloaded from the manufacturer website but whatever i do SP flashtools always terminate with an ENABLE DRAM FAIL ERR, i think because of the wrong preloader previously flashed, i already tried to flash the preloader only and i always get the same error, also done the flash procedure with different flashtool versions,
no meta mode seems to be available, i am stuck and quite desperate, please help me

whats the exact error message?
can I see a screenshot of the error?
Need further assistance? Speak with a Hovatek Representative:

Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)

Request for Private Support
* Install the Hovatek Forum app
* Listen to H-Tech Radio
* Helpline: +2348021840309
* Email: [email protected]
* Skype: Hovatek
Reply
#3
(06-09-2016, 09:37 AM)Brainbooster Wrote: Hi all
i have a Zopo C2 with 4GB rom, sadly after a wrong rom flash, it is completely dead, my win7 pc only recognize it as mtk usb com port, i already tried to flash the stock rom i downloaded from the manufacturer website but whatever i do SP flashtools always terminate with an ENABLE DRAM FAIL ERR, i think because of the wrong preloader previously flashed, i already tried to flash the preloader only and i always get the same error, also done the flash procedure with different flashtool versions,
no meta mode seems to be available, i am stuck and quite desperate, please help me

whats the exact error message?
can I see a screenshot of the error?
Need further assistance? Speak with a Hovatek Representative:

Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)

Request for Private Support
* Install the Hovatek Forum app
* Listen to H-Tech Radio
* Helpline: +2348021840309
* Email: [email protected]
* Skype: Hovatek
Reply
#4
(06-09-2016, 09:37 AM)Brainbooster Wrote: Hi all
i have a Zopo C2 with 4GB rom, sadly after a wrong rom flash, it is completely dead, my win7 pc only recognize it as mtk usb com port, i already tried to flash the stock rom i downloaded from the manufacturer website but whatever i do SP flashtools always terminate with an ENABLE DRAM FAIL ERR, i think because of the wrong preloader previously flashed, i already tried to flash the preloader only and i always get the same error, also done the flash procedure with different flashtool versions,
no meta mode seems to be available, i am stuck and quite desperate, please help me

whats the exact error message?
can I see a screenshot of the error?
Need further assistance? Speak with a Hovatek Representative:

Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)

Request for Private Support
* Install the Hovatek Forum app
* Listen to H-Tech Radio
* Helpline: +2348021840309
* Email: [email protected]
* Skype: Hovatek
Reply
#5
(06-09-2016, 09:37 AM)Brainbooster Wrote: Hi all
i have a Zopo C2 with 4GB rom, sadly after a wrong rom flash, it is completely dead, my win7 pc only recognize it as mtk usb com port, i already tried to flash the stock rom i downloaded from the manufacturer website but whatever i do SP flashtools always terminate with an ENABLE DRAM FAIL ERR, i think because of the wrong preloader previously flashed, i already tried to flash the preloader only and i always get the same error, also done the flash procedure with different flashtool versions,
no meta mode seems to be available, i am stuck and quite desperate, please help me

whats the exact error message?
can I see a screenshot of the error?
Need further assistance? Speak with a Hovatek Representative:

Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)

Request for Private Support
* Install the Hovatek Forum app
* Listen to H-Tech Radio
* Helpline: +2348021840309
* Email: [email protected]
* Skype: Hovatek
Reply
#6
(This post was last modified: 06-10-2016, 07:21 AM by Brainbooster. )
(06-09-2016, 09:02 PM)hovatek Wrote:
(06-09-2016, 09:37 AM)Brainbooster Wrote: Hi all
i have a Zopo C2 with 4GB rom, sadly after a wrong rom flash, it is completely dead, my win7 pc only recognize it as mtk usb com port, i already tried to flash the stock rom i downloaded from the manufacturer website but whatever i do SP flashtools always terminate with an ENABLE DRAM FAIL ERR, i think because of the wrong preloader previously flashed, i already tried to flash the preloader only and i always get the same error, also done the flash procedure with different flashtool versions,
no meta mode seems to be available, i am stuck and quite desperate, please help me

whats the exact error message?
can I see a screenshot of the error?
Now i'm getting a new error,(S_DL_PMT_ERR_NO_SPACE), here u find the screenshot.
there are two roms for my phone, a "normal" rom (meant for different storage phones but same model), and a rev.B rom on the zopo website, i try both but receive the same error message with all the SP flashtool versions i've tested.

Attached Files
.png   Immagine.png (Size: 277.53 KB / Downloads: 3)
Reply
#7
(06-10-2016, 06:58 AM)Brainbooster Wrote: Now i'm getting a new error,(S_DL_PMT_ERR_NO_SPACE), here u find the screenshot.
there are two roms for my phone, a "normal" rom (meant for different storage phones but same model), and a rev.B rom on the zopo website, i try both but receive the same error message with all the SP flashtool versions i've tested.

its either the firmware isnt fully compatible with your phone or the phone's emmc chip is damaged
Need further assistance? Speak with a Hovatek Representative:

Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)

Request for Private Support
* Install the Hovatek Forum app
* Listen to H-Tech Radio
* Helpline: +2348021840309
* Email: [email protected]
* Skype: Hovatek
Reply
#8
(06-10-2016, 09:20 PM)hovatek Wrote:
(06-10-2016, 06:58 AM)Brainbooster Wrote: Now i'm getting a new error,(S_DL_PMT_ERR_NO_SPACE), here u find the screenshot.
there are two roms for my phone, a "normal" rom (meant for different storage phones but same model), and a rev.B rom on the zopo website, i try both but receive the same error message with all the SP flashtool versions i've tested.

its either the firmware isnt fully compatible with your phone or the phone's emmc chip is damaged
I already checked a ton of different roms but nothing seems to work. i don't think the emmc is damaged cause I can read back and format it , but when I try to flash any other image but the preloader I get that error .
before of the bad flash I could enter in the recovery mode at least, now it's  completely dead .
why flashtool is unable to write a new partition table?
Reply
#9
(06-11-2016, 05:53 AM)Brainbooster Wrote: I already checked a ton of different roms but nothing seems to work. i don't think the emmc is damaged cause I can read back and format it , but when I try to flash any other image but the preloader I get that error .
before of the bad flash I could enter in the recovery mode at least, now it's  completely dead .
why flashtool is unable to write a new partition table?

have you tried using a box?
Need further assistance? Speak with a Hovatek Representative:

Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)

Request for Private Support
* Install the Hovatek Forum app
* Listen to H-Tech Radio
* Helpline: +2348021840309
* Email: [email protected]
* Skype: Hovatek
Reply
#10
(This post was last modified: 06-11-2016, 05:55 PM by Brainbooster. )
(06-11-2016, 02:07 PM)hovatek Wrote:
(06-11-2016, 05:53 AM)Brainbooster Wrote: I already checked a ton of different roms but nothing seems to work. i don't think the emmc is damaged cause I can read back and format it , but when I try to flash any other image but the preloader I get that error .
before of the bad flash I could enter in the recovery mode at least, now it's  completely dead .
why flashtool is unable to write a new partition table?

have you tried using a box?

no, I don't have a jtag programmer  and I even don't know the connector location and pinout, any other low level approach options?
Reply










Users browsing this thread:
1 Guest(s)