Hovatek Forum MOBILE Android [Still Unresolved] Having trouble getting tools to work with MT6735 device
Try our Online TWRP Builder..its free!
Can't login? Please, reset your password.


[Still Unresolved] Having trouble getting tools to work with MT6735 device

[Still Unresolved] Having trouble getting tools to work with MT6735 device

Pages (14): 1 2 3 4 514 Next
Aerieana
Aerieana
Aerieana
Techie Member
66
12-06-2016, 11:22 PM
#1



So, I'm trying to create a full backup of my phone before I start fiddling with it (installing a custom recovery and rooting)

I have tried MTK Droid Tool, but I can't create a scatter file and my SoC seems to only be half supported by the latest version (2.5.3d).

I have tried using SP Flash Tool with a MT6735 scatter file taken from this forum to try and use Readback, but there is no size that I can enter because MTK Droid Tool won't give me any block info.

I have also tried using Miracle Box, but my phone keeps disconnecting and reconnecting, plus it boots up if I press the power button just once, or after I reinsert the battery.

I've followed the guides here yet keep hitting dead ends Sad

My phone model is the LG K8 (K350N) and it's running Android 6.0

Please help
This post was last modified: 23-06-2016, 04:03 PM by Aerieana.
major.b2b100
major.b2b100
major.b2b100
Senior Member
159
12-06-2016, 11:51 PM
#2
How sure are you that your LG K8 is an MKT device.
major.b2b100
major.b2b100
major.b2b100
Senior Member
159
12-06-2016, 11:59 PM
#3
The phone CPU is qualcomms.
Just check this http://www.mylgphones.com/lg-k8-4g-k350n...0n10b.html it might be helpful
Aerieana
Aerieana
Aerieana
Techie Member
66
13-06-2016, 12:02 AM
#4
I am 100% certain. While there are some US variants of the LG K8 that have Snapdragon chips, mine is an MTK. Screenshot proof below.
Attached Files
.png
Screenshot_2016-06-12-23-55-45.png
Size: 127.17 KB / Downloads: 22
.png
Screenshot_2016-06-12-23-56-01.png
Size: 107.02 KB / Downloads: 17
Aerieana
Aerieana
Aerieana
Techie Member
66
13-06-2016, 12:08 AM
#5



Even MTK Droid Tool recognises that my device is MTK.
Attached Files
.png
LGK350-MT6735.png
Size: 40.89 KB / Downloads: 20
mensa
mensa
mensa
Senior Member
558
13-06-2016, 01:17 AM
#6
(13-06-2016, 12:08 AM)Aerieana Even MTK Droid Tool recognises that my device is MTK.
With the error obtained on mtk droid tool, it means there is no insecure link. Download adbd from play store and use it to fix that. Again, you must be rooted to grant mtk that root access. When granted, the blue colour will change to green. I will advise you to use mtk v2.4.3 cos I have witnessed a bunch of errors in the latest version.
This post was last modified: 13-06-2016, 01:27 AM by mensa.
Aerieana
Aerieana
Aerieana
Techie Member
66
13-06-2016, 09:59 AM
#7
My phone is not rooted, getting it rooted is what I'm trying to do, as I said in the first post. I didn't read anywhere that having a rooted device was a requirement to use MTK Droid Tool either.

Also, I have no choice but to use version 2.5.3d, because my SoC (MT6735) is not supported in previous versions, though it seems the only support for MT67xx SoCs is that they are detected by it, nothing else.

To quote from another forum about the release of 2.5.3d

"There is a patch to recognize phones with cpu MT67xx family from MTKDroid, but no operations are possible (patch/backup/ecc)."
"Version 2.5.3d (beta) it’s the 2.5.3 version with some changes: MTKDroidTools.ini modified to support new cpu MTK6732/MT6752"

As my device is not rooted, there's no point in me downloading adbd, because it requires root, which I don't have.
Akinwand196
Akinwand196
Akinwand196
Newbie
1
13-06-2016, 10:20 AM
#8
Plz my tecno w4 battery went off after charging for some hours it only showed the red light at the top but it refused to on please what should I do... Please
Aerieana
Aerieana
Aerieana
Techie Member
66
13-06-2016, 01:47 PM
#9
(13-06-2016, 10:20 AM)Akinwand196 Plz my tecno w4 battery went off after charging for some hours it only showed the red light at the top but it refused to on please what should I do... Please

You need to create your own thread if you want others to help, not hijack someone else's thread about a different device and different problem.
matybazz
matybazz
matybazz
Senior Member
2,289
13-06-2016, 07:20 PM
#10



(13-06-2016, 10:20 AM)Akinwand196 Plz my tecno w4 battery went off after charging for some hours it only showed the red light at the top but it refused to on please what should I do... Please

Create a new thread this is someone else's support thread see https://www.hovatek.com/forum/thread-514.html for how to create thread
Pages (14): 1 2 3 4 514 Next
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)
YtWhTl
live chat
whatsapp telegram instagram