Hi, Guest! Login / Register




Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

[Please help] my hotwav venus x3 is not powering on

#1

HI
my phone was soft brick, stock at the logo screen. so i tried to flash it using sp flash tool. following every bit of instruction till its finish and in the end it confirmed the download ok green window. but my phone could not power on anymore
anyone with a solution?


Reply
#2
(This post was last modified: 06-14-2016, 12:25 PM by mensa. )
(06-14-2016, 12:15 PM)shartelier Wrote: HI
my phone was soft brick, stock at the logo screen. so i tried to flash it using sp flash tool. following every bit of instruction till its finish and in the end it confirmed the download ok green window. but my phone could not power on anymore
anyone with a solution?
Stuck at boot, I believe a factory reset in recovery would have fixed it.in any case;
Remove, reinsert the battery and try to power it of. if it persists, then maybe you flashed a wrong rom so check to get a ROM designed specially for your phone and try reflash.
Reply
#3
(This post was last modified: 08-25-2016, 10:19 AM by matybazz. )
(06-14-2016, 12:15 PM)shartelier Wrote: HI
my phone was soft brick, stock at the logo screen. so i tried to flash it using sp flash tool. following every bit of instruction till its finish and in the end it confirmed the download ok green window. but my phone could not power on anymore
anyone with a solution?

Which firmware did you use and have you tried this https://hovatek.com/redirect.php?link=ht...XRMV3Q3cnc
Reply
#4
I am in the same situation, after successful flashing with sp flash tool, the hotwav venus x3 didn't power on again. If anyone have the official default firmware, i'll highly appreciate it. Thank you guys.
Reply
#5
(08-24-2016, 02:12 PM)kaybee246 Wrote: I am in the same situation, after successful flashing with sp flash tool, the hotwav venus x3 didn't power on again. If anyone have the official default firmware, i'll highly appreciate it. Thank you guys.

Create a new thread this is someone else's support thread see https://forum.hovatek.com/thread-514.html for how to create thread
Reply
#6
Senior, sorry to say but i am not changing the subject or anything, why do i have to create a new thread? Well, let me say my problem again, I flashed my Hotwav Venus X3 with the flash file you provided above, after the flashing was done completely using the SD Flash Tool, the phone did not ON again. Please help us cause as for me, it was a client that own phone and he is now seriously disturbing me. Thank you sir.
Reply
#7
Oooh!!!!
Sorry, now i get why you said I should create my thread Senior. Will do that right away. Thank you.
Reply
#8
(09-06-2016, 02:15 PM)kaybee246 Wrote: Senior, sorry to say but i am not changing the subject or anything, why do i have to create a new thread? Well, let me say my problem again, I flashed my Hotwav Venus X3 with the flash file you provided above, after the flashing was done completely using the SD Flash Tool, the phone did not ON again. Please help us cause as for me, it was a client that own phone and he is now seriously disturbing me. Thank you sir.

Its one person per thread so we can focus on one person and also to ensure theres no mixup
Reply










Users browsing this thread:
1 Guest(s)