Hi, Guest! Login / Register




Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Unsuccessful flashing of my Tecno M3

#1

Good morning Hovatek
Pls I followed strictly you instruction on https://forum.hovatek.com/thread-159.html to flash my Tecno M3(Builder No: M3-G130-V1.4-C2BOM-20140305, Android Version: 4.2.2) but the flashing was not successful. The response I got : "PMT of the ROM have changed, it need to be downloaded".
Please assist me.
Thank you very much

Right Obinna
[email protected]


Reply
#2
(This post was last modified: 06-15-2016, 02:35 PM by matybazz. )
(06-15-2016, 12:04 PM)Right Apple Wrote: Good morning Hovatek
Pls I followed strictly you instruction on https://forum.hovatek.com/thread-159.html to flash my Tecno M3(Builder No: M3-G130-V1.4-C2BOM-20140305, Android Version: 4.2.2) but the flashing was not successful. The response I got : "PMT of the ROM have changed, it need to be downloaded".
Please assist me.
Thank you very much

Right Obinna
[email protected]
Are you sure you have the right firmware for your phone?
Format without bootloader in the format tab of spflashtool and flash using download only
Reply
#3
Thank you very much for your kind and swift response.
Pls I downloaded and used your Tecno M3 4.2 Old OS (https://drive.google.com/uc?id=0B9srKhKu...DlBMnZpNUk). I formated without bootloader in the format tab of spflashtool and flash using download only as instructed. On booting my phone, it stops on appearance of "Tecno" logo.
Pls assist.

My Tecno M3 details:
Bulder Number: M3-G130-V1.4-C2BOM-20140305
Android Version: 4.2.2
Reply
#4
My email : [email protected]
Reply
#5
(06-17-2016, 01:24 PM)Right Apple Wrote: My email : [email protected]
Boot into recovery mode and factory reset the phone there.
Reply
#6
(06-17-2016, 01:10 PM)Right Apple Wrote: Thank you very much for your kind and swift response.
Pls I downloaded and used your Tecno M3 4.2 Old OS (https://drive.google.com/uc?id=0B9srKhKu...DlBMnZpNUk). I formated without bootloader in the format tab of spflashtool and flash using download only as instructed. On booting my phone, it stops on appearance of "Tecno" logo.
Pls assist.

My Tecno M3 details:
Bulder Number: M3-G130-V1.4-C2BOM-20140305
Android Version: 4.2.2

Boot to recovery and factory reset.. Power +volumeup...
Reply
#7
Boot to factory mode (power+volume down key) then flash emmc
Reply
#8
recovery is volume up + power
refer to https://forum.hovatek.com/thread-479.html

Need further assistance? Speak with a Hovatek Representative:
Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)
Reply










Users browsing this thread:
1 Guest(s)