Hi, Guest! Login / Register




Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

[Please help] TECNO N7 Bricked and Won't show in SP Tools.

#1
Rainbow 

Good evening, I have a Tecno N7 and once i press the power key it keeps vibrating until i remove the battery. I've downloaded the MTK backup from this site but it seems the files are not complete. I need help please. Huh


Reply
#2
(02-10-2015, 07:41 PM)Kayods Wrote: Good evening, I have a Tecno N7 and once i press the power key it keeps vibrating until i remove the battery. I've downloaded the MTK backup from this site but it seems the files are not complete. I need help please.  Huh

Yes, the files are incomplete and you'll need a series of steps in order to use these files. we'll help you through all these steps but we'll need you to make a complete MTK backup of yours once its working normally again and upload it.
now, before we proceed
1. Have you installed Vcom drivers on your PC? if not do this using https://forum.hovatek.com/thread-440.html so we'll proceed to the next step
Reply
#3
(02-10-2015, 09:35 PM)hovatek Wrote:
(02-10-2015, 07:41 PM)Kayods Wrote: Good evening, I have a Tecno N7 and once i press the power key it keeps vibrating until i remove the battery. I've downloaded the MTK backup from this site but it seems the files are not complete. I need help please.  Huh

Yes, the files are incomplete and you'll need a series of steps in order to use these files. we'll help you through all these steps but we'll need you to make a complete MTK backup of yours once its working normally again and upload it.
now, before we proceed
1. Have you installed Vcom drivers on your PC? if not do this using https://forum.hovatek.com/thread-440.html so we'll proceed to the next step

Yes I have them installed, and would sure upload my full backup as i've proved with my P Five
Reply
#4
(02-13-2015, 09:49 AM)Kayods Wrote: Yes I have them installed, and would sure upload my full backup as i've proved with my P Five

1. start by removing the battery then holding the volume increase button and slotting the battery in. let me know if it keeps vibrating
2. charge the battery using a desktop charger for 3 hours then slot the battery in again and try booting

if both dont work then download
boot.img for N7 @ https://forum.hovatek.com/thread-132.html
cwm recovery for N7 @ https://forum.hovatek.com/thread-75.html
preloader.bin for N7 @ https://forum.hovatek.com/thread-306.html
scatter file for N7 @ https://forum.hovatek.com/thread-88.html

let me know when you've downloaded all these
Reply
#5
(02-13-2015, 10:24 AM)hovatek Wrote:
(02-13-2015, 09:49 AM)Kayods Wrote: Yes I have them installed, and would sure upload my full backup as i've proved with my P Five

1. start by removing the battery then holding the volume increase button and slotting the battery in. let me know if it keeps vibrating
2. charge the battery using a desktop charger for 3 hours then slot the battery in again and try booting

if both dont work then download
boot.img for N7 @ https://forum.hovatek.com/thread-132.html
cwm recovery for N7 @ https://forum.hovatek.com/thread-75.html
preloader.bin for N7 @ https://forum.hovatek.com/thread-306.html
scatter file for N7 @ https://forum.hovatek.com/thread-88.html

let me know when you've downloaded all these

It's still vibrating, even without battery once the power button is pressed it'll start vibrating. until unplugged
Reply
#6
(02-14-2015, 11:34 AM)Kayods Wrote: It's still vibrating, even without battery once the power button is pressed it'll start vibrating. until unplugged

alright. have you downloded all the files above?
Reply
#7
(02-14-2015, 02:09 PM)hovatek Wrote:
(02-14-2015, 11:34 AM)Kayods Wrote: It's still vibrating, even without battery once the power button is pressed it'll start vibrating. until unplugged

alright. have you downloded all the files above?

Yes Sir, I've downloaded them.
Reply
#8
(02-16-2015, 09:09 PM)Kayods Wrote: Yes Sir, I've downloaded them.

try flashing only preloader.bin and lets see what happens
Reply
#9
(02-17-2015, 09:46 AM)hovatek Wrote:
(02-16-2015, 09:09 PM)Kayods Wrote: Yes Sir, I've downloaded them.

try flashing only preloader.bin and lets see what happens

Seems the phone is no connecting well. I'm using windows 8 even the driver installation says it may not work properly.
Reply
#10
(02-17-2015, 08:05 PM)Kayods Wrote: Seems the phone is no connecting well. I'm using windows 8 even the driver installation says it may not work properly.

did you disable signature verification before installation? if you did then not to worry, it should work.
if same then google for USB vcom drivers for mt6577
Reply










Users browsing this thread:
1 Guest(s)