Hi, Guest! Login / Register




Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

[Please help] tecno p5 hangs at boot logo

#1

my tecno p5 hangs at boot logo I got a phone of d same model and create a scatter files which I did successful I tried flashing it with sp flash but gives me this message Message: BROM ERROR : S_DA_SDMMC_WRITE_FAILED (3149)
I even downloaded another stock rom from ur web still d same
pls help out


Reply
#2
(06-23-2016, 09:50 AM)clemmy4real Wrote: my tecno p5 hangs at boot logo I got a phone of d same model and create a scatter files which I did successful I tried flashing it with sp flash but gives me this message Message: BROM ERROR : S_DA_SDMMC_WRITE_FAILED (3149)
I even downloaded another stock rom from ur web still d same
pls help out

Format whole flash except bootloader with sp flashtool then download the firmware,make sure you have the correct firmware for your phone.P5 has many versions be sure you are flashing the exact rom for your device.thankyou
[email protected]
Reply
#3
(This post was last modified: 06-23-2016, 03:00 PM by hovatek. )
(06-23-2016, 09:50 AM)clemmy4real Wrote: my tecno p5 hangs at boot logo I got a phone of d same model and create a scatter files which I did successful I tried flashing it with sp flash but gives me this message Message: BROM ERROR : S_DA_SDMMC_WRITE_FAILED (3149)
I even downloaded another stock rom from ur web still d same
pls help out

download the correct rom for your phone @ https://forum.hovatek.com/thread-311.html depending on the colour of the tecno logo on boot and flash it with sp flashtool,first format whole flash except bootloader then download the rom.
Reply
#4
(06-23-2016, 09:50 AM)clemmy4real Wrote: my tecno p5 hangs at boot logo I got a phone of d same model and create a scatter files which I did successful I tried flashing it with sp flash but gives me this message Message: BROM ERROR : S_DA_SDMMC_WRITE_FAILED (3149)
I even downloaded another stock rom from ur web still d same
pls help out

What is the colour of the tecno logo that first pop up when you power on the phone?

Sent from my Infinix NOTE 2 using Hovatek mobile
Reply
#5
it is blue colour
Reply
#6
(This post was last modified: 06-23-2016, 03:03 PM by mensa. )
(06-23-2016, 02:53 PM)clemmy4real Wrote: it is blue colour

Did you flash the old tecno 05 firmware?
Reply
#7
(06-23-2016, 09:50 AM)clemmy4real Wrote: my tecno p5 hangs at boot logo I got a phone of d same model and create a scatter files which I did successful I tried flashing it with sp flash but gives me this message Message: BROM ERROR : S_DA_SDMMC_WRITE_FAILED (3149)
I even downloaded another stock rom from ur web still d same
pls help out

what version of SP flash tool are you using?
Need further assistance? Speak with a Hovatek Representative:
Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)
Reply
#8
I use version v5.1352.01

Reply
#9
(This post was last modified: 06-24-2016, 10:26 AM by mensa. )
(06-24-2016, 08:39 AM)clemmy4real Wrote: I use version v5.1352.01

I don't know if you understood my petition. Am not talking about stock ROM because I have tried countless stock ROM; here and other sites but non is fixing it. I just want you to check your network to see if it will disconnects when you tune it to 3G only or WCDMA only. If it does not disconnect, then you backup secro and nvram partitions for me so I can use it to fix my phone. That is all I was saying.

Sent from my Infinix NOTE 2 using Hovatek mobile
Reply
#10
(06-23-2016, 09:50 AM)clemmy4real Wrote: my tecno p5 hangs at boot logo I got a phone of d same model and create a scatter files which I did successful I tried flashing it with sp flash but gives me this message Message: BROM ERROR : S_DA_SDMMC_WRITE_FAILED (3149)
I even downloaded another stock rom from ur web still d same
pls help out

using the MTK Droid tools method @ https://forum.hovatek.com/thread-116.html, backup the working phone's NVRAM
waiting...
Need further assistance? Speak with a Hovatek Representative:
Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)
Reply










Users browsing this thread:
1 Guest(s)