Hovatek Forum MOBILE Android Gionee M2 mini don,t boot at all and never detected by SPFlash Tool
Can't login? Please, reset your password.
Hovatek is recruiting! Apply Now


Gionee M2 mini don,t boot at all and never detected by SPFlash Tool

Gionee M2 mini don,t boot at all and never detected by SPFlash Tool

Toppylinks
Toppylinks
Toppylinks
Enthusiastic Member
9
25-06-2016, 02:57 PM
#1



Please House, I wake up this morning and i found my phone booting to gionee logo but never pass the logo stage but kept the cycle like that.

What I have done
I flash it with the gionee p2m mini stock backup i downloaded, it passed the Download DA stage but when it comes to the main flash stage it stopped at 1%

so i tried to format it, unfortunate for me i clicked on format whole but it says ok

Now i went back to download and i load the scatter files, then clicked on download, it laod DA 100% but says BROM ERROR S_DA NAND_BAD_BLOCK (3045)

Please what can I do to get it back.

Thanks
Saeang
Saeang
Saeang
Newbie
1
25-06-2016, 06:49 PM
#2
Hi, I new here... I have a phone Nex Mobile smile 3. But keep pop me Unfortunately, xxxxxxxxx has stop. But I use Smart Phone Flash Tools to format. Since like not connecting to the phone. Anyone kindly advice me. Thank you
hovatek
hovatek
hovatek
Administrator
49,570
26-06-2016, 12:08 PM
#3
(25-06-2016, 06:49 PM)Saeang Hi, I new here... I have a phone Nex Mobile smile 3. But keep pop me Unfortunately, xxxxxxxxx has stop. But I use Smart Phone Flash Tools to format. Since like not connecting to the phone. Anyone kindly advice me. Thank you

create a new thread, this is someone else's support thread
see https://www.hovatek.com/forum/thread-514.html for how to create a thread

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.
hovatek
hovatek
hovatek
Administrator
49,570
26-06-2016, 12:09 PM
#4
(25-06-2016, 02:57 PM)Toppylinks Please House, I wake up this morning and i found my phone booting to gionee logo but never pass the logo stage but kept the cycle like that.

What I have done
I flash it with the gionee p2m mini stock backup i downloaded, it passed the Download DA stage but when it comes to the main flash stage it stopped at 1%

so i tried to format it, unfortunate for me i clicked on format whole but it says ok

Now i went back to download and i load the scatter files, then clicked on download, it laod DA 100% but says BROM ERROR S_DA NAND_BAD_BLOCK (3045)

Please what can I do to get it back.

Thanks

can you get access to a working Gionee M2 Mini?

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.
Toppylinks
Toppylinks
Toppylinks
Enthusiastic Member
9
27-06-2016, 06:04 PM
#5



(26-06-2016, 12:08 PM)hovatek
(25-06-2016, 06:49 PM)Saeang Hi, I new here... I have a phone Nex Mobile smile 3. But keep pop me Unfortunately, xxxxxxxxx has stop. But I use Smart Phone Flash Tools to format. Since like not connecting to the phone. Anyone kindly advice me. Thank you

create a new thread, this is someone else's support thread
see https://www.hovatek.com/forum/thread-514.html for how to create a thread

(26-06-2016, 12:09 PM)hovatek
(25-06-2016, 02:57 PM)Toppylinks Please House, I wake up this morning and i found my phone booting to gionee logo but never pass the logo stage but kept the cycle like that.

What I have done
I flash it with the gionee p2m mini stock backup i downloaded, it passed the Download DA stage but when it comes to the main flash stage it stopped at 1%

so i tried to format it, unfortunate for me i clicked on format whole but it says ok

Now i went back to download and i load the scatter files, then clicked on download, it laod DA 100% but says BROM ERROR S_DA NAND_BAD_BLOCK (3045)

Please what can I do to get it back.

Thanks

can you get access to a working Gionee M2 Mini?

No
hovatek
hovatek
hovatek
Administrator
49,570
28-06-2016, 12:02 PM
#6
(27-06-2016, 06:04 PM)Toppylinks No

we'll list the firmware @ https://www.hovatek.com/forum/thread-389.html once available

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.
Toppylinks
Toppylinks
Toppylinks
Enthusiastic Member
9
28-06-2016, 05:52 PM
#7
(28-06-2016, 12:02 PM)hovatek
(27-06-2016, 06:04 PM)Toppylinks No

we'll list the firmware @ https://www.hovatek.com/forum/thread-389.html once available


Okay.

Thanks
Toppylinks
Toppylinks
Toppylinks
Enthusiastic Member
9
28-06-2016, 05:54 PM
#8
(28-06-2016, 12:02 PM)hovatek
(27-06-2016, 06:04 PM)Toppylinks No

we'll list the firmware @ https://www.hovatek.com/forum/thread-389.html once available


Okay.

Thanks
AnonymousDeveloper111
AnonymousDeveloper111
AnonymousDeveloper111
Enthusiastic Member
9
14-08-2019, 03:56 PM
#9
It is cause by incorrect block map!
You're trying to flash wrong firmware. I think P2M stock firmware can only be used in P2M. but lets give a try
You can use Wrr tool to get scatter file of M2 mini then try flashing it again by selecting boot, recovery... manually
or 
you can directly replace scatter(p2m) file's block size using Disk info app in m2
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)
YtWhTl
live chat
whatsapp telegram instagram