Hi, Guest! Login / Register




Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Tecno m3 wahala

#1

I formatted a tecno m3 but it won't boot. At first, I downloaded the old version of bcos I wasnt sure of the version but after I flashed it, it won't boot so I downloaded the new version stock ROM and flashed into the phone but this time, it on but would be stuck in "tecno" logo. I tried it severally but d same problem persist. I also discoverd that the userdata and cache was not in the stock ROM.Hovatek, pls help me out bcos am afraid to even flash the p5+ with me nw so DAT d same problem won't occur.


Sent from my TECNO-J5 using Hovatek mobile


Reply
#2
Pls hovatek and her members, help me out!!!

Sent from my TECNO-J5 using Hovatek mobile
Reply
#3
(07-06-2016, 06:57 AM)Bancy Wrote: I formatted a tecno m3 but it won't boot. At first, I downloaded the old version of bcos I wasnt sure of the version but after I flashed it, it won't boot so I downloaded the new version stock ROM and flashed into the phone but this time, it on but would be stuck in "tecno" logo. I tried it severally but d same problem persist. I also discoverd that the userdata and cache was not in the stock ROM.Hovatek, pls help me out bcos am afraid to even flash the p5+ with me nw so DAT d same problem won't occur.


Sent from my TECNO-J5 using Hovatek mobile

(07-06-2016, 06:59 AM)Bancy Wrote: Pls hovatek and her members, help me out!!!

Sent from my TECNO-J5 using Hovatek mobile

Boot to recovery (by holding volume up+power key) and wipe data /factory reset
Reply
#4
(07-06-2016, 06:57 AM)Bancy Wrote: I formatted a tecno m3 but it won't boot. At first, I downloaded the old version of bcos I wasnt sure of the version but after I flashed it, it won't boot so I downloaded the new version stock ROM and flashed into the phone but this time, it on but would be stuck in "tecno" logo. I tried it severally but d same problem persist. I also discoverd that the userdata and cache was not in the stock ROM.Hovatek, pls help me out bcos am afraid to even flash the p5+ with me nw so DAT d same problem won't occur.


Sent from my TECNO-J5 using Hovatek mobile

you need to flash the right firmware for your M3.
is your M3 the 4.2 or 4.4 variant?
If its 4.2, check the pics @ https://forum.hovatek.com/thread-311.html if yours is the Blue or Black type
Need further assistance? Speak with a Hovatek Representative:
Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)
Reply










Users browsing this thread:
1 Guest(s)