Hi, Guest! Login / Register




Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

[Please help] cwm recover tool to softbrick phone

#1

can i flash cwm recover tool to my softbrick device,im not sure if i lost root access when i did a factory reset.


Reply
#2
(02-13-2015, 08:00 AM)codyseth Wrote: can i flash cwm recover tool to my softbrick device,im not sure if i lost root access when i did a factory reset.

if you have a cwm recovery image then you can just flash it. if not, try this method @ https://forum.hovatek.com/thread-455.html
if that fails, you'll need to get the stock boot.img and recovery.img using Sp flash tool readback (see https://forum.hovatek.com/thread-526.html ) then create a cwm image using this guide @ https://forum.hovatek.com/thread-587.html
Need further assistance? Speak with a Hovatek Representative:
Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)
Reply
#3
Hi guys its been a while ,had my fine replaced under warranty lol.I tried flashing cwm tool using rom manager but it says 'device not supported'.Will I have better luck with mtk mobile uncle on play store.Don't want to make same mistake of trying anything without making a backup of my stock ROM.
Reply
#4
OK I got my fone replaced now I am rooted again and have ROM manager but want to install cwm tool.It says device not supported. Will I have better luck with mtk mobile uncle on play store ?Don't have access to a PC at this moment.
Reply
#5
(This post was last modified: 03-24-2015, 10:41 AM by hovatek. )
(03-24-2015, 06:16 AM)codyseth Wrote: OK I got my fone replaced now I am rooted again and have ROM manager but want to install cwm tool.It says device not supported. Will I have better luck with mtk mobile uncle on play store ?Don't have access to a PC at this moment.

before you go ahead, backup your ROM
if its MTk based then use this guide @ https://forum.hovatek.com/thread-468.html
if not, tell me the phone model and chipset
Need further assistance? Speak with a Hovatek Representative:
Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)
Reply
#6
cool i have all the tools going to give it a shot
Reply










Users browsing this thread:
1 Guest(s)