Hi, Guest! Login / Register




Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Missing IMEI only on 1 ROM I'm trying to port

#21
(This post was last modified: 07-22-2016, 03:06 PM by robneymcplum. )

I did. I installed the rom with no baseband/IMEI, blisspop. Then flashed the secro.img from my STOCK/WORKING rom via SPtools into the nonworking rom,


Reply
#22
(07-22-2016, 03:05 PM)robneymcplum Wrote: I did. I installed the rom with no baseband/IMEI, blisspop. Then flashed the secro.img from my STOCK/WORKING rom via SPtools into the nonworking rom,

You should obtain the baseband before any other thing can work. The flash completed???

Sent from my Infinix-X600 using Hovatek mobile
Reply
#23
yes, SPtools (flashing ONLY secro.img) went, red, then yellow, then green tick saying OK! took battery out, rebooted, and still no baseband Sad
Reply
#24
(This post was last modified: 07-22-2016, 04:15 PM by mensa. )
(07-22-2016, 03:59 PM)robneymcplum Wrote: yes, SPtools (flashing ONLY secro.img) went, red, then yellow, then green tick saying OK! took battery out, rebooted, and still no baseband Sad

Is left with only miracle box which can fix the unknown baseband. Can you try that one more time.

Sent from my Infinix-X600 using Hovatek mobile
Reply
#25
righto..

So now, I need to flash my STOCK ROM to my phone, for miraclebox to read the info off that right?
Reply
#26
(07-22-2016, 04:30 PM)robneymcplum Wrote: righto..

So now, I need to flash my STOCK ROM to my phone, for miraclebox to read the info off that right?

Yes, when backing up and detected by miracle box, select nvram, nvdata and secro to backup

Sent from my Infinix-X600 using Hovatek mobile
Reply
#27
miracle box:

waiting for usb...
waiting for usb...

>>none usb port, maybe driver not installed

All vcom drivers are installed, all adb drivers installed, sptools sees it fine....

I'm at a complete loss Sad
Reply
#28
I have all those files backed up from a TWRP backup of a working ROM, have tried to restore them in TWRP over the blisspop ROM that isnt working, still nothing Sad
Reply
#29
(07-22-2016, 04:45 PM)robneymcplum Wrote: I have all those files backed up from a TWRP backup of a working ROM, have tried to restore them in TWRP over the blisspop ROM that isnt working, still nothing Sad

Have you tried replacing the mpob file? 0if yes, then I don't think is ever possible because you have to get the baseband before anything else can work. Like chamelephon, sn write tool and the like

Sent from my Infinix-X600 using Hovatek mobile
Reply
#30
MP0B_001 file?

Yes, I tried a flashable zip and also moved it to data/nvram/..... and changed permissions. Still nothing.
Reply










Users browsing this thread:
1 Guest(s)