Hi, Guest! Login / Register




Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

The snokor z5000

#41
(This post was last modified: 08-26-2016, 10:28 AM by soteben. )

Is the rashr.apk. I use for it oo


Reply
#42
What else can I do?

Sent from my Snokor Z5000 using Hovatek mobile
Reply
#43
(08-26-2016, 07:08 PM)soteben Wrote: What else can I do?

Sent from my Snokor Z5000 using Hovatek mobile

You have the firmware right?
Reply
#44
(This post was last modified: 08-27-2016, 10:19 AM by soteben. )
Yes
The one I download
Reply
#45
I enter the firmware and I saw config and another folder img

Sent from my Snokor Z5000 using Hovatek mobile
Reply
#46
(08-27-2016, 10:52 AM)soteben Wrote: I enter the firmware and I saw config and another folder img

Sent from my Snokor Z5000 using Hovatek mobile

Do you have recovery.img in that folder?
Reply
#47
Yes I have it

Sent from my Snokor Z5000 using Hovatek mobile
Reply
#48
(This post was last modified: 08-29-2016, 07:23 AM by soteben. )
I should extract it?
If yes!
What else to do?
Reply
#49
(This post was last modified: 08-29-2016, 07:45 AM by naw3r. )
if you have the original imei written on the box or written on the phones back, then download MTK engineering mod tool its an apk, install and open it, tap on MTK Settings then slide to the left and tap on CDS information, inside CDS information tap on Radio information you will see Phone 1 and Phone 2

[Image: 3d76309a5e.jpg]


[Image: 3d7c5caf46.jpg]

[Image: 3d771b7b3b.jpg]

[Image: 3d7b6ea843.jpg]

Tap on Phone 1 to change your imei, you will see (At+) type in (At+EGMR=1,7,"IMEI HERE") replace IMEI HERE with your original IMEI and tap on the SEND AT COMMAND BUTTON

Phone 2 same step as phone 1 instead type (At+EGMR=1,10,"IMEI") tap [b]SEND AT COMMAND BUTTON[/b]

I COULD NOT SHOW OTHER SNAPS AS IT HAS MY IMEI INFORMATION.
Reply
#50
Upload the recovery.IMG and post the link here
Reply










Users browsing this thread:
1 Guest(s)