Hi, Guest! Login / Register




Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

[Please help] Cant boot to Recovery!

#1

Wassup guys,
Yesterday I used TWRP Recovery port tool to port and flash recovery on my friends
Intex Aqua V 05
Android 4.4.2
MT6571
UBBIFS Type device
since then the device ain't booting to recovery mode
when I try to boot into recovery mode
it boots shows black screen for 4-5 seconds
then reboots normally to android os
I tried flashing Stock recovery whose backup I had taken with RashR Android app
but still nothing happens
please help hovatek as soon as possible
and after that also help to create a new good custom recovery for this device


Reply
#2
(07-27-2016, 12:32 PM)awesomeironman Wrote: Wassup guys,
Yesterday I used TWRP Recovery port tool to port and flash recovery on my friends
Intex Aqua V 05
Android 4.4.2
MT6571
UBBIFS Type device
since then the device ain't booting to recovery mode
when I try to boot into recovery mode
it boots shows black screen for 4-5 seconds
then reboots normally to android os
I tried flashing Stock recovery whose backup I had taken with RashR Android app
but still nothing happens
please help hovatek as soon as possible
and after that also help to create a new good custom recovery for this device

Have you downloaded the firmware for the phone?
if not, do so
waiting...
Need further assistance? Speak with a Hovatek Representative:
Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)
Reply
#3
(07-28-2016, 10:43 AM)hovatek Wrote:
(07-27-2016, 12:32 PM)awesomeironman Wrote: Wassup guys,
Yesterday I used TWRP Recovery port tool to port and flash recovery on my friends
Intex Aqua V 05
Android 4.4.2
MT6571
UBBIFS Type device
since then the device ain't booting to recovery mode
when I try to boot into recovery mode
it boots shows black screen for 4-5 seconds
then reboots normally to android os
I tried flashing Stock recovery whose backup I had taken with RashR Android app
but still nothing happens
please help hovatek as soon as possible
and after that also help to create a new good custom recovery for this device

Have you downloaded the firmware for the phone?
if not, do so
waiting...

I have downloaded one firmware, but I am not sure if it is correct firmware for my device
that's why I don't wanna take risk of ending with a hard bricked device
Reply
#4
(07-28-2016, 11:00 AM)awesomeironman Wrote: I have downloaded one firmware, but I am not sure if it is correct firmware for my device
that's why I don't wanna take risk of ending with a hard bricked device

flash only recovery.img
Need further assistance? Speak with a Hovatek Representative:
Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)
Reply
#5
(07-29-2016, 04:54 PM)hovatek Wrote:
(07-28-2016, 11:00 AM)awesomeironman Wrote: I have downloaded one firmware, but I am not sure if it is correct firmware for my device
that's why I don't wanna take risk of ending with a hard bricked device

flash only recovery.img

too late lol
I had taken a firmware dump using miracle box before
hopefully that dump worked
it got restored and recovery is working now
but I lost all user data
as miracle box didn't gave me any window to select which partitions to restore!
so it restored everything
the dump was in .bin format
anyways thanks for the response hovatek

Reply
#6
(07-29-2016, 05:09 PM)awesomeironman Wrote: too late lol
I had taken a firmware dump using miracle box before
hopefully that dump worked
it got restored and recovery is working now
but I lost all user data
as miracle box didn't gave me any window to select which partitions to restore!
so it restored everything
the dump was in .bin format
anyways thanks for the response hovatek

just in case of next time, you can tick save as scatter file when dumping with miracle box.
that way when restoring it would request for partitions to restore
Reply
#7
i flash my tenco m3 and it went off....i need help to revive it again
Reply
#8
(07-29-2016, 10:50 PM)chidera mark Wrote: i flash my tenco m3 and it went off....i need help to revive it again

create a new thread.. this is someone else's support thread
see https://forum.hovatek.com/thread-514.html for how to create a thread
Reply
#9
(07-29-2016, 10:43 PM)X3non Wrote:
(07-29-2016, 05:09 PM)awesomeironman Wrote: too late lol
I had taken a firmware dump using miracle box before
hopefully that dump worked
it got restored and recovery is working now
but I lost all user data
as miracle box didn't gave me any window to select which partitions to restore!
so it restored everything
the dump was in .bin format
anyways thanks for the response hovatek

just in case of next time, you can tick save as scatter file when dumping with miracle box.
that way when restoring it would request for partitions to restore

ok next time I'll do that
but please also give steps
next time to restore that dump saved with scatter option
to restore only selected partitions
Reply
#10
(07-30-2016, 03:45 AM)awesomeironman Wrote: ok next time I'll do that
but please also give steps
next time to restore that dump saved with scatter option
to restore only selected partitions

See method 2 here https://forum.hovatek.com/thread-13600.html
Reply










Users browsing this thread:
1 Guest(s)