Hi, Guest! Login / Register




Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

[Please help] Sp Flash tool Driver issue

#11


.png   Untitled9.png (Size: 233.96 KB / Downloads: 3)
i hope am not having driver issues


Reply
#12
(08-01-2016, 06:37 PM)X3non Wrote: [quote='Hex' pid='83951' dateline='1470066686']
Note: I was able to format with out any problem atleast that's what caused this mess in the first place but i cant back the rom

Also check if you have this stock rom @ https://hovatek.com/redirect.php?link=ht...zV1dkdwQTQ
if you dont, then download and try flashing it
[/quote


If,I got you right you previously formatted the phone successfully.
Here is my opinion for you,
Exercise some patience to hold the POWER botton and CONNECT your charging cable for some mins.........or better still,
Continue charging your phone for hours though you can not expect your device come on...
You then try any of your ROMs,I believe you should get different result.
...
Reply
#13
was able to flash the phone, i used the scatter file of iNew L4a (similar rom) to flash the mtk files of my fone including preloader. but my phone wont come on, no respond not even a sound when connected to pc
Reply
#14
(08-02-2016, 12:29 AM)major.b2b100 Wrote:
(08-01-2016, 10:42 AM)matybazz Wrote:
(07-31-2016, 06:30 PM)Hex Wrote: I have a bricked Bluboo x550, phone refuses to power on, i tried flashing stock rom but i keep getting Enable DRAM Failed. My phone uses a non removable battery, i have installed Preloaded USB Vcom driver but flashtool seems not to recognise it, instead it uses the phone default driver which install whenever i plug the phone when switched off i.e MediaTek USB Port.

The firmware you're trying to flash is either not compatible with your device or you have selected the wrong flashing settings
Refer to https://forum.hovatek.com/thread-439.html
Also send us a screenshot of spflashtool after you load the scatter file

Sorry, in the fist place how did you get your device bricked.???

My phone was never bricked just mistakenly formatted the Rom....but my phone is now hard bricked with no pc detection
Reply
#15
(This post was last modified: 08-02-2016, 01:37 PM by major.b2b100. )
(08-02-2016, 02:48 AM)Hex Wrote: was able to flash the phone, i used the scatter file of iNew L4a (similar rom) to flash the mtk files of my fone including preloader. but my phone wont come on, no respond not even a sound when connected to pc

OK bro,you're making me believe that you used different file for device not the right one. In situation where PC is not detecting phone,you can consider reinstalling your mtk drivers removing the already installed ones.
Go through this thread for more understanding on usbdeveiw.

https://forum.hovatek.com/thread-9854.html
Try that just don't give up,we will still get to the root.....
Reply
#16
(This post was last modified: 08-02-2016, 02:42 PM by matybazz. )
(08-02-2016, 10:33 AM)Hex Wrote: My phone was never bricked just mistakenly formatted the Rom....but my phone is now hard bricked with no pc detection

You just escalated the issue by flashing a wrong firmware to your phone
1. Keep charging untill battery icon shows or
2. Take out battery and reinsert
3. Keep searching for the correct firmware for your phone
Reply










Users browsing this thread:
1 Guest(s)