Huawei Y600-U20 Stucked Boot Logo & Sleeping Android Recovery
Huawei Y600-U20 Stucked Boot Logo & Sleeping Android Recovery
(03-08-2016, 11:13 AM)matybazz(03-08-2016, 01:36 AM)Daxjeremy Hi, Yes I believe I have the right firmware since its the same I used before. There's no error after flashing, its has a message completed but when I remove the battery, & restart It is still on boot logo & sleeping android in recovery. Still no response even when I press volume keys.
One thing I noticed is that, when I plug the cable it automatically turns one then stuck at boot logo. So what I did was let it stay & drain the battery. Now since no power left, it still vibrates everytime I pressed the power.
Try flashing just the recovery and the spflashtool firmware format you have where did you get it from?
(04-08-2016, 01:28 PM)Daxjeremy Hi, yes I already tried flashing just the recovery & the firmware I used before which used to work came from other forums, but I also tried one which came from this forum.
Y600-U20V100R001C435B012_DCC
(04-08-2016, 08:30 PM)hovatek(04-08-2016, 01:28 PM)Daxjeremy Hi, yes I already tried flashing just the recovery & the firmware I used before which used to work came from other forums, but I also tried one which came from this forum.
Y600-U20V100R001C435B012_DCC
OK. We'll try something.
Takeout the battery, charge externally then reinsert. Let me know if the phone is able to boot
(05-08-2016, 03:52 PM)Daxjeremy Hi, good day, thank you for your reply.
Yes I'm done with that, but still have the same result like before. After I inserted the battery it open automatically but up to boot logo only. And flashing just the recovery does't work. It says it downloaded OK but when I open it back still doesn't boot completely & have sleeping android
(06-08-2016, 09:20 AM)hovatek(05-08-2016, 03:52 PM)Daxjeremy Hi, good day, thank you for your reply.
Yes I'm done with that, but still have the same result like before. After I inserted the battery it open automatically but up to boot logo only. And flashing just the recovery does't work. It says it downloaded OK but when I open it back still doesn't boot completely & have sleeping android
Try booting into factory mode
vol down + power
wipe emmc if you're able to boot into it
(06-08-2016, 09:20 AM)hovatek(05-08-2016, 03:52 PM)Daxjeremy Hi, good day, thank you for your reply.
Yes I'm done with that, but still have the same result like before. After I inserted the battery it open automatically but up to boot logo only. And flashing just the recovery does't work. It says it downloaded OK but when I open it back still doesn't boot completely & have sleeping android
Try booting into factory mode
vol down + power
wipe emmc if you're able to boot into it
(06-08-2016, 12:45 PM)Daxjeremy Hi, also failed to boot into factory more, it stucked in boot logo. I tried replacing the battery but had same results.
(06-08-2016, 09:49 PM)hovatek(06-08-2016, 12:45 PM)Daxjeremy Hi, also failed to boot into factory more, it stucked in boot logo. I tried replacing the battery but had same results.
Are you able to flash the firmware using firmware upgrade?
(07-08-2016, 06:38 AM)Daxjeremy Hi, yes I was able to flash using firmware upgrade and it also says DOWNLOADED OK, but had same result, stucked logo & dead android. BTW I was able to install custom recovery(carliv_touch_recovery) but I won't mount anything, won't mount system,data or emmc, sd card also won't mount so I cant install my update.zip.