Hi, Guest! Login / Register




Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

[Please help] MY TECNO P5 IS DEAD PLS HELP

#1

Pls help with my tecno p5 old version, it always shows tecno logo, but now is not showing again and not charging.

i connected it to pc with vcom drivers, it detects my phone, but when i download ur p5 rom, i tried flashing it with sp flash tools, it will just stop at "FORMAT 0%" but not reading, i tried charging the phone, for over an hour now its not charging at all, but the PC is detecting the phone, pls what can i do.

Thanks!


Reply
#2
(08-08-2016, 05:34 PM)emmynoni Wrote: Pls help with my tecno p5 old version, it always shows tecno logo, but now is not showing again and not charging.

i connected it to pc with vcom drivers, it detects my phone, but when i download ur p5 rom, i tried flashing it with sp flash tools, it will just stop at "FORMAT 0%" but not reading, i tried charging the phone, for over an hour now its not charging at all, but the PC is detecting the phone, pls what can i do.

Thanks!

Ensure to install VCOM drivers @ https://forum.hovatek.com/thread-440.html
Need further assistance? Speak with a Hovatek Representative:
Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)
Reply
#3
(This post was last modified: 08-09-2016, 11:42 AM by emmynoni. Edit Reason: More complains )
(08-09-2016, 09:42 AM)hovatek Wrote:
(08-08-2016, 05:34 PM)emmynoni Wrote: Pls help with my tecno p5 old version, it always shows tecno logo, but now is not showing again and not charging.

i connected it to pc with vcom drivers, it detects my phone, but when i download ur p5 rom, i tried flashing it with sp flash tools, it will just stop at "FORMAT 0%" but not reading, i tried charging the phone, for over an hour now its not charging at all, but the PC is detecting the phone, pls what can i do.

Thanks!

Ensure to install VCOM drivers @ https://forum.hovatek.com/thread-440.html


I installed vcom drivers,  connect my sp flash tools, click on format, clicked start, removed my battery and slot it back, connect my USB cord, it read 100% first, then later started with FORMAT 0%, waited for four minutes, I got this reply, ERROR BROM BLA BLA BLA.....  SOMETHING LIKE SETTINGS IS NOT CORRECT,
pls what can I do, help me out

It shows FORMAT FLASH ERROR, PLEASE CHECK YOUR FORMAT SETTINGS, I use both sp flash tool version 5 and 3
Reply
#4
as a matter of facts, i saw one of your post about tecno dead phones, using PRELOADER.BIN to make it come alive, still not working for me, please what can i do, i really need your help on this, flashing of infinix is very easy, but this tecno is too difficult
Reply
#5
(08-09-2016, 11:33 AM)emmynoni Wrote: I installed vcom drivers,  connect my sp flash tools, click on format, clicked start, removed my battery and slot it back, connect my USB cord, it read 100% first, then later started with FORMAT 0%, waited for four minutes, I got this reply, ERROR BROM BLA BLA BLA.....  SOMETHING LIKE SETTINGS IS NOT CORRECT,
pls what can I do, help me out

It shows FORMAT FLASH ERROR, PLEASE CHECK YOUR FORMAT SETTINGS,  I use both sp flash tool version 5 and 3

Send a screenshot of the error
Reply
#6
(08-09-2016, 02:20 PM)matybazz Wrote:
(08-09-2016, 11:33 AM)emmynoni Wrote: I installed vcom drivers,  connect my sp flash tools, click on format, clicked start, removed my battery and slot it back, connect my USB cord, it read 100% first, then later started with FORMAT 0%, waited for four minutes, I got this reply, ERROR BROM BLA BLA BLA.....  SOMETHING LIKE SETTINGS IS NOT CORRECT,
pls what can I do, help me out

It shows FORMAT FLASH ERROR, PLEASE CHECK YOUR FORMAT SETTINGS,  I use both sp flash tool version 5 and 3

Send a screenshot of the error

I chatted with one of ur members online, he told me to flash the preloader.bin, it worked, and my phone is power up, but it only stuck at tecno logo, so I tried during the full flashing, it keep poping out "PMT changed for the ROM, it must be downloaded"
Reply
#7
(08-10-2016, 08:53 AM)emmynoni Wrote: I chatted with one of ur members online, he told me to flash the preloader.bin, it worked, and my phone is power up, but it only stuck at tecno logo, so I tried during the full flashing, it keep poping out "PMT changed for the ROM, it must be downloaded"

What is the colour of the first tecno logo after you boot the phone?
Reply
#8
(08-10-2016, 10:58 AM)matybazz Wrote:
(08-10-2016, 08:53 AM)emmynoni Wrote: I chatted with one of ur members online, he told me to flash the preloader.bin, it worked, and my phone is power up, but it only stuck at tecno logo, so I tried during the full flashing, it keep poping out "PMT changed for the ROM, it must be downloaded"

What is the colour of the first tecno logo after you boot the phone?


It was blue, now its not powering up again, thinking maybe d battery is dead again

Reply
#9
(08-10-2016, 10:58 AM)matybazz Wrote:
(08-10-2016, 08:53 AM)emmynoni Wrote: I chatted with one of ur members online, he told me to flash the preloader.bin, it worked, and my phone is power up, but it only stuck at tecno logo, so I tried during the full flashing, it keep poping out "PMT changed for the ROM, it must be downloaded"

What is the colour of the first tecno logo after you boot the phone?


It was blue, now its not powering up again, thinking maybe d battery is dead again
Reply
#10
(08-10-2016, 12:19 PM)emmynoni Wrote: It was blue, now its not powering up again, thinking maybe d battery is dead again

Use format+download or firmware upgrade settings in spflashtool
Reply










Users browsing this thread:
1 Guest(s)