Hi, Guest! Login / Register




Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

[Please help] stock on the tecno m3 logo

#1

help i am stock on the tecno m3 logo...

i formatted the whole device using sp flash tools and then flash the file into the phone (usrdata n cache was not included... is it neccessary)

but it wont still come up even tried factory reset...

can someone help me with cwm backup so i can get the usrdata n cache

thanks


Reply
#2
U need user data and cache....I have experience that before and without User data and cache I think it would not work
Reply
#3
(This post was last modified: 08-13-2016, 04:48 AM by ALBA. )
But after flashing ur device using User data and cache, ur imei may be invalid and u need to replace it back..

And pls which of the tecno m3 are u talking about?

Can u please get the same phone model from a friend or someone to help u make a backup of the use data and cache if possible the hole stick rom
Reply
#4
(08-13-2016, 03:57 AM)amazino33 Wrote: help i am stock on the tecno m3 logo...

i formatted the whole device using sp flash tools and then flash the file into the phone (usrdata n cache was not included... is it neccessary)

but it wont still come up even tried factory reset...

can someone help me with cwm backup so i can get the usrdata n cache

thanks

Boot into factory mode and wipe emmc
Need further assistance? Speak with a Hovatek Representative:
Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)
Reply
#5
tecno m3 4.4.2

did the factory reset and the clear emmc still didnt work

And i cant find the exact model of my phone around the available one is tecno m3 4.2.2... can anyone help me with a cwm backup i can get the usrdata n cache from there plssss.\

thanks

Reply
#6
(08-13-2016, 11:16 PM)amazino33 Wrote: tecno m3 4.4.2

did the factory reset and the clear emmc still didnt work

And i cant find the exact model of my phone around the available one is tecno m3 4.2.2... can anyone help me with a cwm backup i can get the usrdata n cache from there plssss.\

thanks

1. Where did you download the firmware from
2. How exactly did you clear emmc?
Need further assistance? Speak with a Hovatek Representative:
Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)
Reply
#7
1. CANT REALLY REMEMBER
2. THROUGH THE CWM RECOVERY
Reply
#8
(08-13-2016, 03:57 AM)amazino33 Wrote: help i am stock on the tecno m3 logo...

i formatted the whole device using sp flash tools and then flash the file into the phone (usrdata n cache was not included... is it neccessary)

but it wont still come up even tried factory reset...

can someone help me with cwm backup so i can get the usrdata n cache

thanks

Hope you know tecno m3 has variants?
Reply
#9
(08-13-2016, 07:35 PM)hovatek Wrote:
(08-13-2016, 03:57 AM)amazino33 Wrote: help i am stock on the tecno m3 logo...

i formatted the whole device using sp flash tools and then flash the file into the phone (usrdata n cache was not included... is it neccessary)

but it wont still come up even tried factory reset...

can someone help me with cwm backup so i can get the usrdata n cache

thanks

Boot into factory mode and wipe emmc

I Can u please send us the picture of ur phone....check my attachment whether is the same us urs

Cus I also faced the same issue.... the phone screen turned white after Flashing.... The only way I restore the phone back is by getting the same phone model from a friend and did the rom backup... Can u please get the same model from a friend to make the rom backup?

Attached Files
.jpg   IMG_20150101_012250.jpg (Size: 1.45 MB / Downloads: 0)
Reply
#10
(08-18-2016, 03:19 AM)amazino33 Wrote: 1. CANT REALLY REMEMBER
2. THROUGH THE CWM RECOVERY
 
You clear emmc in factory mode (vol down + power) not recovery mode
Need further assistance? Speak with a Hovatek Representative:
Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)
Reply










Users browsing this thread:
1 Guest(s)