Error 4008, 3149 - lenovo vibe x (s960).
Error 4008, 3149 - lenovo vibe x (s960).
(24-08-2016, 07:39 PM)Blackgoku Good morning sir!
I am having lenovo vibe x (s960), while trying to flash with spflash tool i am facing errors like 4008 and 3149. ( always at 17 % )
I have tried all the methods suggested on the other threads with same error but not working.
I hope someone guide me.
Note- i have tried following -Different port, pc, cord, rom but no success
(24-08-2016, 07:39 PM)Blackgoku Good morning sir!
I am having lenovo vibe x (s960), while trying to flash with spflash tool i am facing errors like 4008 and 3149. ( always at 17 % )
I have tried all the methods suggested on the other threads with same error but not working.
I hope someone guide me.
Note- i have tried following -Different port, pc, cord, rom but no success
(25-08-2016, 11:44 AM)hovatekCan emmc chip be repaired or replace, and if yes what will be the cost.(24-08-2016, 07:39 PM)Blackgoku Good morning sir!
I am having lenovo vibe x (s960), while trying to flash with spflash tool i am facing errors like 4008 and 3149. ( always at 17 % )
I have tried all the methods suggested on the other threads with same error but not working.
I hope someone guide me.
Note- i have tried following -Different port, pc, cord, rom but no success
If the suggestions @ https://www.hovatek.com/forum/thread-439.html don't help then the emmc chip is likely damaged
(12-10-2016, 04:29 PM)ridwan anwar Hi guys, My phone is dead(Lenove S960 Vibe X), but will lit up with the text on bottom left of the screen stated
=> TOOL DL image fail
Now I try to flash using this rom - S960_ROW_S211_140702
Using SP flash tool new v5.1352.01 and v13 also,,, still failed
This error pop out.
BROM ERROR ; S_DA_SDMMC_(3149)WRITE_FAILED
There is no hint below.
I have tried all the methods suggested on the other threads with same error but not working.
actually the one that i have done :
1. Format....OK
2. Flashing with all target_bin content, stuck at 17% ( yellow bar 17% dowload flash )
3, tried dowload 1 by 1 target_bin content, but failed for system.img and userdata.img.
4. Download without 2 of them ....ok
see attached files
Note- i have tried following -Different port, pc, cord, rom but no success
I hope someone guide me.
Thanks and Regards
Ridwan Anwar ( ridwan.anwar@yahoo.com )