Hi, Guest! Login / Register




Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

[Please help] my Tecno F7 phone doesn't boot up to home screen.

#1

gud morning admins, my phone is Tecno F7 ?, i don't really know what wrong i have done. recently it will just boot up to logo and it will become hot. I did factory reset, but still doesn't boot to home screen although it is no more heating. I want to use sp flash tool. please could you please grant me access to download stock rom (mtk backup) for Tecno F7. [email protected],thanks.


Reply
#2
(02-20-2015, 01:10 AM)giftium Wrote: gud morning admins, my phone is Tecno F7 ?, i don't really know what wrong i have done. recently it will just boot up to logo and it will become hot. I did factory reset, but still doesn't boot to home screen although it is no more heating. I want to use sp flash tool. please could you please grant me access to download stock rom (mtk backup) for Tecno F7. [email protected],thanks.

granted! download Phantom A backup @ https://forum.hovatek.com/thread-311.html and flash only system.img (Android) using SP flash tool @ https://forum.hovatek.com/thread-159.html
Need further assistance? Speak with a Hovatek Representative:
Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)
Reply
#3
Thanks admin, I have downloaded the stock mtk backup. i used SP flash tool v3 to flash only system.img as you advised (Android), it flashed correctly but the tecno logo didn't still move away (during booting it didn't even sound or animated). I also tried flashing other images boot.img,esr 1,esr 2, preloader.bin et al, excluding user data and cache, it was still the same result. i then tried to format only the phone using same SP flash tool v3, after complete formatting and showing OK, i forgot to remove the battery for 15 seconds, i just tried to switch it on after unplugging the USB, unfortunately it didn't come on again, even charging also it didn't. then i switched to v5 of SP flash tool, i ticked all the images bar userdata and cache, choosing download only as the option. It flashed completely and this time i observed the 15s but on switching on it was only showing a blank screen that boots on and off every 4 seconds until i remove the battery, even when trying to charge now, it does the same thing. please i need your help. thanks once again.
Reply
#4
(02-20-2015, 06:59 PM)giftium Wrote: Thanks admin, I have downloaded the stock mtk backup. i used SP flash tool v3 to flash only system.img as you advised (Android), it flashed correctly but the tecno logo didn't still move away (during booting it didn't even sound or animated). I also tried flashing other images boot.img,esr 1,esr 2, preloader.bin et al, excluding user data and cache, it was still the same result. i then tried to format only the phone using same SP flash tool v3, after complete formatting and showing OK, i forgot to remove the battery for 15 seconds, i just tried to switch it on after unplugging the USB, unfortunately it didn't come on again, even charging also it didn't. then i switched to v5 of SP flash tool, i ticked all the images bar userdata and cache, choosing download only as the option. It flashed completely and this time i observed the 15s but on switching on it was only showing a blank screen that boots on and off every 4 seconds until i remove the battery, even when trying to charge now, it does the same thing. please i need your help. thanks once again.

shouldnt be much of a problem
granted you permission to download Phantom A + backup @ https://forum.hovatek.com/thread-311.html
flash the files and lets see what happens
Need further assistance? Speak with a Hovatek Representative:
Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)
Reply
#5
I downloaded and flash the files from Phantom A+, but it is showing BROM ERROR [4032] and say load matches does not match and some other related terms. on the phone even recovery doesn't come up any longer. thanks.
Reply
#6
(02-21-2015, 07:32 AM)giftium Wrote: I downloaded and flash the files from Phantom A+, but it is showing BROM ERROR [4032] and say load matches does not match and some other related terms. on the phone even recovery doesn't come up any longer. thanks.
ok. lets stick to the phantom A backup. try flashing it again
Need further assistance? Speak with a Hovatek Representative:
Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)
Reply
#7
I have tried flashing again with Phantom A files, it is still not working. pls help
Reply
#8
(02-22-2015, 12:36 AM)giftium Wrote: I have tried flashing again with Phantom A files, it is still not working. pls help
format using v3 and flash the files again. lets know what happens
Need further assistance? Speak with a Hovatek Representative:
Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)
Reply
#9
Thats same problem am facing on my f7 tecno not display when on
Reply
#10
(04-29-2015, 12:28 PM)sobatec Wrote: Thats same problem am facing on my f7 tecno not display when on

thats the sign of an incompatible ROM
Need further assistance? Speak with a Hovatek Representative:
Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)
Reply










Users browsing this thread:
1 Guest(s)