Hi, Guest! Login / Register




Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

[Please help] Flashing huawei y541-uo2/ huawei y5c

#1
(This post was last modified: 09-01-2016, 01:43 AM by Jheiy. )

Good day! My huawei y5c is deadboot and need to flash but everytime i flashed, it stucked in _REPARTITION_ "failed: wait input timeout". I tried b105 and b106 firmware, and many version of research and upgrade download..  Please help..  Thanks in advance!!!



Attached Files
.jpg   FB_IMG_1472559607839.jpg (Size: 29.54 KB / Downloads: 2)
Reply
#2
Build no:108 available in market please download and create dload folder in sd card and copy the same install the same through recovery mode
Reply
#3
(09-01-2016, 05:38 AM)anil dasari Wrote: Build no:108 available in market please download and create dload folder in sd card and copy the same install the same through recovery mode

Sir my phone is dead, cant access to recovery mode..

Sent from my Lenovo A5000 using Hovatek mobile
Reply
#4
(09-01-2016, 01:41 AM)Jheiy Wrote: Good day! My huawei y5c is deadboot and need to flash but everytime i flashed, it stucked in _REPARTITION_ "failed: wait input timeout". I tried b105 and b106 firmware, and many version of research and upgrade download..  Please help..  Thanks in advance!!!

Untick all except fdl 1&2 and cache then try flashing again
Reply
#5
(09-01-2016, 04:29 PM)hovatek Wrote:
(09-01-2016, 01:41 AM)Jheiy Wrote: Good day! My huawei y5c is deadboot and need to flash but everytime i flashed, it stucked in _REPARTITION_ "failed: wait input timeout". I tried b105 and b106 firmware, and many version of research and upgrade download..  Please help..  Thanks in advance!!!

Untick all except fdl 1&2 and cache then try flashing again

Same result sir.. _REPARTITION_ failed input timeout,, when i untick the repartition, it says that "incompatible partition"

Sent from my Lenovo A5000 using Hovatek mobile
Reply
#6
(This post was last modified: 09-03-2016, 09:34 AM by hovatek. )
(09-02-2016, 02:51 AM)Jheiy Wrote: Same result sir.. _REPARTITION_ failed input timeout,, when i untick the repartition, it says that "incompatible partition"

Sent from my Lenovo A5000 using Hovatek mobile

Possibly a driver issue. Update the driver using the "Research / Upgrade download tool does not show waiting.... instead, the phone just charges" guide @ https://forum.hovatek.com/thread-4870.html
Reply
#7
(09-03-2016, 09:33 AM)hovatek Wrote:
(09-02-2016, 02:51 AM)Jheiy Wrote: Same result sir..  _REPARTITION_ failed input timeout,,  when i untick the repartition,  it says that "incompatible partition"

Sent from my Lenovo A5000 using Hovatek mobile

Possibly a driver issue. Update the driver using the "Research / Upgrade download tool does not show waiting.... instead, the phone just charges" guide @ https://forum.hovatek.com/thread-4870.html
research/ upgrade tool does responsed..  fdl 1&2 are downloaded,, after that _REPARTITION_ appeared and become status failed input timeout.. Please help..

Attached Files
.png   Screenshot (52).png (Size: 427.98 KB / Downloads: 4)
.png   Screenshot (51).png (Size: 474.59 KB / Downloads: 1)
Reply
#8
(This post was last modified: 09-04-2016, 08:07 PM by hovatek. )
(09-04-2016, 04:39 PM)Jheiy Wrote: research/ upgrade tool does responsed..  fdl 1&2 are downloaded,, after that _REPARTITION_ appeared and become status failed input timeout.. Please help..

Try fdl 1&2 and userdata
Reply
#9
Same result sir,, how can i bypass repartition process?
Reply
#10
(09-05-2016, 07:47 AM)Jheiy Wrote: Same result sir,, how can i bypass repartition process?

Are you certain these pac files are for your variant?
Reply










Users browsing this thread:
1 Guest(s)