Hi, Guest! Login / Register




Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

[Please help] Infinix 509

#11

I tied all these but still chaching


Reply
#12
(09-01-2016, 02:09 PM)kosinki Wrote: hi, is your infinix 16 gig or 32 gig?

Its 16gb 1gb ram
Reply
#13
(09-01-2016, 12:55 PM)peter osoro Wrote: So it doesn't enter preloader mode first before showing charging battery?
Confirm under device manager.
And It's healthier to use infinix flash tool

Sent from my INFINIX-X551 using Hovatek mobile

NO, and am using infinix flash tool as in my first post.
Reply
#14
(09-01-2016, 12:54 PM)Christianihechi Wrote:
(09-01-2016, 12:49 PM)Aminu Garba Ahmad Wrote:
(09-01-2016, 12:07 PM)Christianihechi Wrote:
(09-01-2016, 11:10 AM)Aminu Garba Ahmad Wrote: please urgent response needed!

i try to flash infinix 509 with infinix flashtool and the flashing interrupt by unfortunate usb disconnect after at list 30% , after that I'm very tied to flash because its stocking at infinix logo if it switch on and only shows  battery bar charging when connect to flashtool, but i can boot to the stock recovery and bootloader.


Since the flashing process was interrupted, there is no need trying to boot into recovery because the file system has been altered incompletely and wont boot up. You should try forcing it to power off completely and then re-flash if not it would just charge when you connect it to your PC.

It just charge when i connect for re-flashing

Try forcing the phone to power down[holding power button for a while] before flashing again.

I have tried shut it down for one day before flashing but it still shows battery charging logo when i connect.
Reply
#15
(09-01-2016, 07:40 PM)Aminu Garba Ahmad Wrote:
(09-01-2016, 12:54 PM)Christianihechi Wrote:
(09-01-2016, 12:49 PM)Aminu Garba Ahmad Wrote:
(09-01-2016, 12:07 PM)Christianihechi Wrote:
(09-01-2016, 11:10 AM)Aminu Garba Ahmad Wrote: please urgent response needed!

i try to flash infinix 509 with infinix flashtool and the flashing interrupt by unfortunate usb disconnect after at list 30% , after that I'm very tied to flash because its stocking at infinix logo if it switch on and only shows  battery bar charging when connect to flashtool, but i can boot to the stock recovery and bootloader.


Since the flashing process was interrupted, there is no need trying to boot into recovery because the file system has been altered incompletely and wont boot up. You should try forcing it to power off completely and then re-flash if not it would just charge when you connect it to your PC.

It just charge when i connect for re-flashing

Try forcing the phone to power down[holding power button for a while] before flashing again.

I have tried shut it down for one day before flashing but it still shows battery charging logo when i connect.

Try to see if you can flash another MTK phone via sp flashtool. If it works, then there is an issue with the X509. I suggest you carefully disconect the battery and try flashing it again.
Reply
#16
Please does the phone make any sound when counted to pc??
Reply
#17
(09-01-2016, 08:42 PM)Christianihechi Wrote:
(09-01-2016, 07:40 PM)Aminu Garba Ahmad Wrote:
(09-01-2016, 12:54 PM)Christianihechi Wrote:
(09-01-2016, 12:49 PM)Aminu Garba Ahmad Wrote:
(09-01-2016, 12:07 PM)Christianihechi Wrote: Since the flashing process was interrupted, there is no need trying to boot into recovery because the file system has been altered incompletely and wont boot up. You should try forcing it to power off completely and then re-flash if not it would just charge when you connect it to your PC.

It just charge when i connect for re-flashing

Try forcing the phone to power down[holding power button for a while] before flashing again.

I have tried shut it down for one day before flashing but it still shows battery charging logo when i connect.

Try to see if you can flash another MTK phone via sp flashtool. If it works, then there is an issue with the X509. I suggest you carefully disconect the battery and try flashing it again.

sp flashtool works fine i have tested anothee phone.
Reply
#18
(09-01-2016, 08:44 PM)ALBA Wrote: Please does the phone make any sound when counted to pc??

No.
Reply
#19
(09-01-2016, 09:28 PM)Aminu Garba Ahmad Wrote:
(09-01-2016, 08:44 PM)ALBA Wrote: Please does the phone make any sound when counted to pc??

No.

If the Pc doesn't make any sound, its because it has not detected the phone. Make sure your PC volume is loud or use a headset when connecting the phone. Also check device manager to see if there is any change when you connect the device.

Like Admin[Hovatek] rightly said before, try taking out the battery and see if it will be detected and flashed successfully. Try that and lets see how it goes. Goodluck
Reply
#20
(This post was last modified: 09-02-2016, 07:45 AM by Aminu Garba Ahmad. )
(09-01-2016, 09:49 PM)Christianihechi Wrote:
(09-01-2016, 09:28 PM)Aminu Garba Ahmad Wrote:
(09-01-2016, 08:44 PM)ALBA Wrote: Please does the phone make any sound when counted to pc??

No.

If the Pc doesn't make any sound, its because it has not detected the phone. Make sure your PC volume is loud or use a headset when connecting the phone. Also check device manager to see if there is any change when you connect the device.

Like Admin[Hovatek] rightly said before, try taking out the battery and see if it will be detected and flashed successfully. Try that and lets see how it goes. Goodluck

The only remain issue for taking out battery is: the infinix 509 is slot in battery (none removeable).
Reply










Users browsing this thread:
1 Guest(s)