[Please help] Infinix 509
[Please help] Infinix 509
(01-09-2016, 12:55 PM)peter osoro So it doesn't enter preloader mode first before showing charging battery?
Confirm under device manager.
And It's healthier to use infinix flash tool
Sent from my INFINIX-X551 using Hovatek mobile
(01-09-2016, 12:54 PM)Christianihechi(01-09-2016, 12:49 PM)Aminu Garba Ahmad(01-09-2016, 12:07 PM)Christianihechi(01-09-2016, 11:10 AM)Aminu Garba Ahmad please urgent response needed!
i try to flash infinix 509 with infinix flashtool and the flashing interrupt by unfortunate usb disconnect after at list 30% , after that I'm very tied to flash because its stocking at infinix logo if it switch on and only shows battery bar charging when connect to flashtool, but i can boot to the stock recovery and bootloader.
Since the flashing process was interrupted, there is no need trying to boot into recovery because the file system has been altered incompletely and wont boot up. You should try forcing it to power off completely and then re-flash if not it would just charge when you connect it to your PC.
It just charge when i connect for re-flashing
Try forcing the phone to power down[holding power button for a while] before flashing again.
(01-09-2016, 07:40 PM)Aminu Garba Ahmad(01-09-2016, 12:54 PM)Christianihechi(01-09-2016, 12:49 PM)Aminu Garba Ahmad(01-09-2016, 12:07 PM)Christianihechi(01-09-2016, 11:10 AM)Aminu Garba Ahmad please urgent response needed!
i try to flash infinix 509 with infinix flashtool and the flashing interrupt by unfortunate usb disconnect after at list 30% , after that I'm very tied to flash because its stocking at infinix logo if it switch on and only shows battery bar charging when connect to flashtool, but i can boot to the stock recovery and bootloader.
Since the flashing process was interrupted, there is no need trying to boot into recovery because the file system has been altered incompletely and wont boot up. You should try forcing it to power off completely and then re-flash if not it would just charge when you connect it to your PC.
It just charge when i connect for re-flashing
Try forcing the phone to power down[holding power button for a while] before flashing again.
I have tried shut it down for one day before flashing but it still shows battery charging logo when i connect.
(01-09-2016, 08:42 PM)Christianihechi(01-09-2016, 07:40 PM)Aminu Garba Ahmad(01-09-2016, 12:54 PM)Christianihechi(01-09-2016, 12:49 PM)Aminu Garba Ahmad(01-09-2016, 12:07 PM)Christianihechi Since the flashing process was interrupted, there is no need trying to boot into recovery because the file system has been altered incompletely and wont boot up. You should try forcing it to power off completely and then re-flash if not it would just charge when you connect it to your PC.
It just charge when i connect for re-flashing
Try forcing the phone to power down[holding power button for a while] before flashing again.
I have tried shut it down for one day before flashing but it still shows battery charging logo when i connect.
Try to see if you can flash another MTK phone via sp flashtool. If it works, then there is an issue with the X509. I suggest you carefully disconect the battery and try flashing it again.
(01-09-2016, 09:28 PM)Aminu Garba Ahmad(01-09-2016, 08:44 PM)ALBA Please does the phone make any sound when counted to pc??
No.
(01-09-2016, 09:49 PM)Christianihechi(01-09-2016, 09:28 PM)Aminu Garba Ahmad(01-09-2016, 08:44 PM)ALBA Please does the phone make any sound when counted to pc??
No.
If the Pc doesn't make any sound, its because it has not detected the phone. Make sure your PC volume is loud or use a headset when connecting the phone. Also check device manager to see if there is any change when you connect the device.
Like Admin[Hovatek] rightly said before, try taking out the battery and see if it will be detected and flashed successfully. Try that and lets see how it goes. Goodluck