Hi, Guest! Login / Register




Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

[Tutorial] pc not displaying after shutdown

#1

Hello, my dam pc just started this **** of nt displaying anything after on it (pressing power button)

The problem is when I on it u will on after oning it won't display anything
I tried removing D Ba3, I waited for it to cool all are just in vain, it dint display

What d problem
Pls help


Reply
#2
(09-03-2016, 10:58 AM)ham_samm Wrote: Hello, my dam pc just started this **** of nt displaying anything after on it (pressing power button)

The problem is when I on it u will on after oning it won't display anything
I tried removing D Ba3, I waited for it to cool all are just in vain, it dint display

What d problem
Pls help

* 1st test your PC using an external monitor if it still doesnt display
* Then take out the ram > clean the RAM slots with a brush then reinsert the RAM(s) back. You can also try using a different RAM if you have any spares
* If it still doesn't work then check the VGA and Processor
Reply
#3
(09-03-2016, 05:59 PM)X3non Wrote:
(09-03-2016, 10:58 AM)ham_samm Wrote: Hello, my dam pc just started this **** of nt displaying anything after on it (pressing power button)

The problem is when I on it u will on after oning it won't display anything
I tried removing D Ba3, I waited for it to cool all are just in vain, it dint display

What d problem
Pls help

* 1st test your PC using an external monitor if it still doesnt display
* Then take out the ram > clean the RAM slots with a brush then reinsert the RAM(s) back. You can also try using a different RAM if you have any spares
* If it still doesn't work then check the VGA and Processor

Alryt thanks

will give a try
Reply
#4
(09-03-2016, 05:59 PM)X3non Wrote:
(09-03-2016, 10:58 AM)ham_samm Wrote: Hello, my dam pc just started this **** of nt displaying anything after on it (pressing power button)

The problem is when I on it u will on after oning it won't display anything
I tried removing D Ba3, I waited for it to cool all are just in vain, it dint display

What d problem
Pls help

* 1st test your PC using an external monitor if it still doesnt display
* Then take out the ram > clean the RAM slots with a brush then reinsert the RAM(s) back. You can also try using a different RAM if you have any spares
* If it still doesn't work then check the VGA and Processor

THANKS
hv tried using another monitor ,
cleaning the ram slots both dint work

my pc is a laptop ,hw do i go abt the vga n processor
Reply
#5
(09-06-2016, 08:17 PM)ham_samm Wrote: THANKS
hv tried using another monitor ,
cleaning the ram slots  both dint work

my pc is a laptop ,hw do i go abt the vga n processor

Did it display atall when you used another monitor?
Reply
#6
(09-07-2016, 10:22 AM)matybazz Wrote:
(09-06-2016, 08:17 PM)ham_samm Wrote: THANKS
hv tried using another monitor ,
cleaning the ram slots  both dint work

my pc is a laptop ,hw do i go abt the vga n processor

Did it display atall when you used another monitor?

Noo not at all
Reply
#7
(09-03-2016, 05:59 PM)X3non Wrote:
(09-03-2016, 10:58 AM)ham_samm Wrote: Hello, my dam pc just started this **** of nt displaying anything after on it (pressing power button)

The problem is when I on it u will on after oning it won't display anything
I tried removing D Ba3, I waited for it to cool all are just in vain, it dint display

What d problem
Pls help

* 1st test your PC using an external monitor if it still doesnt display
* Then take out the ram > clean the RAM slots with a brush then reinsert the RAM(s) back. You can also try using a different RAM if you have any spares
* If it still doesn't work then check the VGA and Processor

X3non

Hovatek


Kindly reply
Reply
#8
(09-07-2016, 12:24 PM)ham_samm Wrote: Noo not at all

You should have the Motherboard checked then
Reply










Users browsing this thread:
1 Guest(s)