Hi, Guest! Login / Register




Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

[Please help] Micromax A116 is dead. Flashing error is NO_SPACE(5069) PLS HELP ME..!

#1
(This post was last modified: 09-16-2016, 12:22 PM by LoverOfLove. )

hELLO experts,,
My micromax a116 phone (mt 6589)is dead...

In sp flash tool i'm facing BROM ERROR: S_DL_PMT_ERR_NO_SPACE(5069) error with no hint.


I've tried three stock roms for my phone.

In memory test section the result is following.

============ Memory Detection Report ===========
Internal RAM:
External RAM:
Type = DRAM
Size = 0x40000000 (1024MB/8192Mb)
NAND Flash:
ERROR: NAND Flash was not detected!
EMMC:
EMMC_PART_BOOT1 Size = 0x0000000000200000(2MB)
EMMC_PART_BOOT2 Size = 0x0000000000200000(2MB)
EMMC_PART_RPMB Size = 0x0000000000200000(2MB)
EMMC_PART_GP1 Size = 0x0000000000000000(0MB)
EMMC_PART_GP2 Size = 0x0000000000000000(0MB)
EMMC_PART_GP3 Size = 0x0000000000000000(0MB)
EMMC_PART_GP4 Size = 0x0000000000000000(0MB)
EMMC_PART_USER Size = 0x00000000e7000000(3696MB)
============ RAM Test ============
Data Bus Test:
[D0]
[D1]
[D2]
[D3]
[D4]
[D5]
[D6]
[D7]
[D8]
[D9]
[D10]
[D11]
[D12]
[D13]
[D14]
[D15]
[D16]
[D17]
[D18]
[D19]
[D20]
[D21]
[D22]
[D23]
[D24]
[D25]
[D26]
[D27]
[D28]
[D29]
[D30]
[D31]
OK!!
Address Bus Test:
[A1]
[A2]
[A3]
[A4]
[A5]
[A6]
[A7]
[A8]
[A9]
[A10]
[A11]
[A12]
[A13]
[A14]
[A15]
[A16]
[A17]
[A18]
[A19]
[A20]
[A21]
[A22]
[A23]
[A24]
[A25]
[A26]
[A27]
[A28]
[A29]
OK!!
RAM Pattern Test :
Writing ...
0x44332211,
0xA5A5A5A5,
0xA5A5A500,
0xA500A500,
0xA5000000,
0x00000000,
0xFFFF0000,
0xFFFFFFFF,


and after that BROM ERROR : S_DA_SDMMC_WRITE_FAILED (3153)    error appeared with no hint.

i've tried downloading separate files in sp flash tool but only preloader file is only flashing succesfully.

so experts pls suggest me what can i do now.?
and pls also tell me that problem is from hardware or software.?
thanks in advance.. Smile


Reply
#2
(09-16-2016, 12:10 PM)LoverOfLove Wrote: BROM ERROR : S_DA_SDMMC_WRITE_FAILED (3153)    error appeared with no hint.

i've tried downloading separate files in sp flash tool but only preloader file is only flashing succesfully.

so experts pls suggest me what can i do now.?
and pls also tell me that problem is from hardware or software.?
thanks in advance.. Smile

can you format in spflashtool?
Its likely eMMC chip is bad
Reply
#3
matybazz thanks for reply..
I just tried to format it in spft but BROM ERROR:S_DL_READ_PT_FAIL (5070) error appeared.

it looks like its the hardware problem..
if its emmc problem then pls tell me if it can be repair at local mobile repair shop or service center.... or it is irreparable and phone will never work again..

thank u..! Smile
Reply
#4
(09-16-2016, 09:27 PM)LoverOfLove Wrote: matybazz thanks for reply..
I just tried to format it in spft but BROM ERROR:S_DL_READ_PT_FAIL (5070) error appeared.

it looks like its the hardware problem..
if its emmc problem then pls tell me if it can be repair at local mobile repair shop or service center.... or it is irreparable and phone will never work again..

thank u..! Smile

Its most likely hardware related and you can have a technician replace the emmc
Need further assistance? Speak with a Hovatek Representative:
Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)
Reply
#5
thank you.. hovatek..!! Smile

Reply










Users browsing this thread:
1 Guest(s)