Hi, Guest! Login / Register




Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

[Please help] laptop stuck on HP invent screen

#1

HP pav DV2000 stuck on HP invent screen,all the function keys not working,I have tried to boot without one ram,without hd,with another working ram,without the cmos battery,when I press esc key or any function key immediately I switch it on,the key activates,but hangs like that. pls help me.


Reply
#2
(09-27-2016, 01:48 PM)EMMANUS Wrote: HP pav DV2000 stuck on HP invent screen,all the function keys not working,I have tried to boot without one ram,without hd,with another working ram,without the cmos battery,when I press esc key or any function key immediately I switch it on,the key activates,but hangs like that. pls help me.

* Is there any blinking light on the keyboard?
* Does the PC make any sound while stuck on this screen?

Try this
* Leave the cmos battery in the PC
* Remove the HDD
* Insert a tested working RAM
* Disconnect the keyboard
* Power on the PC and see if it still gets stuck
Reply
#3
I already did all u suggested,no way.
Reply
#4
(09-27-2016, 07:22 PM)EMMANUS Wrote: I already did all u suggested,no way.

you didnt answer the questions above
and did you disconnect the keyboard?
Reply
#5
Sorry...no blinking light,no sound except when I press esc then f2 in quick succession. I have disconnected both keyboard and mouse seperately,no show
Reply
#6
(09-27-2016, 10:51 PM)EMMANUS Wrote: Sorry...no blinking light,no sound except when I press esc then f2 in quick succession. I have disconnected both keyboard and mouse seperately,no show

are you removing these components separately i.e like one after the other?
you'll need to take out all peripherals, HDD/CD rom, keyboard/mouse at once leaving just 1 good RAM
* clean the RAM slot with a dry brush before putting the RAM
then turn on the PC and check if it still gets stuck
Reply
#7
I have removed everything,leaving only a good ram,the same thing,it is not ram. I have done what u said.
Reply










Users browsing this thread:
1 Guest(s)