The Innjoo Max 2 is a 5 inch screen Android phone running on OS 5.1 (Lollipop), a Mediatek MT6580 chipset, 1GB RAM, a Quad-core 1.3 GHz CPU and a Li-Ion 4,000 mAh battery. Our favorite One-Click root apps still do not support this new generation of Mediatek devices so Team Hovatek has been porting TWRP and CWM recovery to make rooting of such devices possible. This brief guide will show you how to easily root your Innjoo Max 2.
Boot the phone into recovery mode using Volume up button + Power button
In TWRP, if you get a prompt asking you to swipe to allow TWRP modify the system partition then go ahead and swipe. To swipe, place your finger on the green circle then slide it to the right
In TWRP recovery, tap Install
Navigate to the location of the SuperSU.zip and select it
Swipe to confirm flashing of SuperSU.zip and wait till flashing is complete
hamid aboud says:
February 2, 2016 at 10:18 pm
alhamdulillah
finally i was able to root my innjoo max 2 with the above tutorial after searching day and nght on how to root.
keep the good work te
am hovatek and may you leave long to provide us with tutorials to make us enjoy our phones to the maximum. thanks
REPLY
Hovatek says:
February 2, 2016 at 10:20 pm
Thank you
REPLY
hamid aboud says:
February 2, 2016 at 10:22 pm
alhamdulillah
finally i was able to root my innjoo max 2 with the above tutorial after searching day and nght on how to root.
keep the good work te
am hovatek and may you live long to provide us with tutorials to make us enjoy our phones to the maximum. thanks
REPLY
elhadary says:
August 23, 2016 at 10:04 am
you have innjoo max 2
انت لديك موبايل innjoo max 2
هل فعلا الطريقة الى قمت بها فعاله ولا يوجد بها اخطاء ؟
REPLY
Kingsley says:
February 5, 2016 at 9:43 pm
Please help o… Tried using this method. When I tried to boot into recovery mode it stopped at the Innjoo logo. Now it won’t reboot normally. Please I need the stock rom to enable me flash it. Thanks.
REPLY
Hovatek says:
February 5, 2016 at 9:57 pm
explain in detail exactly what you did
REPLY
zuby says:
February 16, 2016 at 6:35 am
please after following the various steps for installing a new VCOM drivers, it displayed on my app manger as already been installed but when connect my device[already switched off] to the pc it would stll not pop up on windows except i power on the device. please i’d really appreciate if you guys can be of assistance here.
REPLY
Hovatek says:
February 16, 2016 at 6:44 am
Does your pc make a sound when you connect the switched off phone?
REPLY
zuby says:
February 16, 2016 at 5:49 pm
no, nothing at all
REPLY
zuby says:
February 16, 2016 at 5:51 pm
my device is actually a max 2 plus
REPLY
Hovatek says:
February 16, 2016 at 6:22 pm
Root using Kingroot 4.8.0 . You can then flash twrp using Flashify
REPLY