Hi, Guest! Login / Register
Giveaway: Free Hovatek T-shirts, Hoodies & Cufflinks.. I WANT ONE! (Nov 25, 2017)
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Camon C9 not booting after rooting attempt

#1

Good day Admin, I just bought a camon c9 yesterday and after following your tutorial on how to root, i unlocked the bootloader, flashed cwm recovery, and now my phone doesnt boot past tecno logo. I have downloaded the rom available on your site and flashed with miracle box. No success. It shows "done" after like a second when flashed with miracle box, but it doesnt flash anything. I also flashed with SP Flash tool but still no success. SP Flash Tool shows the "downloading DA" red line and completes at 100% but it never continues from there, only shows Brom Error : 0x3 (something like that). I am able to boot into the cwm recovery, but that doest provide any help.

Please help me. This phone is not even 24 hours old yet.


Reply
#2
(09-30-2016, 01:03 PM)debielink Wrote: Good day Admin, I just bought a camon c9 yesterday and after following your tutorial on how to root, i unlocked the bootloader, flashed cwm recovery, and now my phone doesnt boot past tecno logo. I have downloaded the rom available on your site and flashed with miracle box. No success. It shows "done" after like a second when flashed with miracle box, but it doesnt flash anything. I also flashed with SP Flash tool but still no success. SP Flash Tool shows the "downloading DA" red line and completes at 100% but it never continues from there, only shows Brom Error : 0x3 (something like that). I am able to boot into the cwm recovery, but that doest provide any help.

Please help me. This phone is not even 24 hours old yet.
We have different types of tecno c9 so please check the type u have ..... and please send the exact error code u get after flashing with Sp flash tool..

Waiting to hear from you....
Reply
#3
Please, how can I check the type I have at this point where the phone is already dead? All I know at this point is that the one I have is the 16gb one and not the 32gb one. Sp shows brom error :?? (0x3)

Sent from my TECNO-C8 using Hovatek mobile
Reply
#4
(09-30-2016, 08:34 PM)ALBA Wrote:
(09-30-2016, 01:03 PM)debielink Wrote: Good day Admin, I just bought a camon c9 yesterday and after following your tutorial on how to root, i unlocked the bootloader, flashed cwm recovery, and now my phone doesnt boot past tecno logo. I have downloaded the rom available on your site and flashed with miracle box. No success. It shows "done" after like a second when flashed with miracle box, but it doesnt flash anything. I also flashed with SP Flash tool but still no success. SP Flash Tool shows the "downloading DA" red line and completes at 100% but it never continues from there, only shows Brom Error : 0x3 (something like that). I am able to boot into the cwm recovery, but that doest provide any help.

Please help me. This phone is not even 24 hours old yet.
We have different types of tecno c9 so please check the type u have ..... and please send the exact error code u get after flashing with Sp flash tool..

Waiting to hear from you....

Please, how can I check the type I have at this point where the phone is already dead? All I know at this point is that the one I have is the 16gb one and not the 32gb one. Sp shows brom error :?? (0x3)

Sent from my TECNO-C8 using Hovatek mobile

Sent from my TECNO-C8 using Hovatek mobile
Reply
#5
(This post was last modified: 10-01-2016, 12:36 AM by X3non. )
(09-30-2016, 09:06 PM)debielink Wrote: Please, how can I check the type I have at this point where the phone is already dead? All I know at this point is that the one I have is the 16gb one and not the 32gb one. Sp shows brom error :?? (0x3)

Sent from my TECNO-C8 using Hovatek mobile

use the miracle box guide @ https://forum.hovatek.com/thread-13894.html to flash only system.img or system.bin
* attach a screenshot of the SPft error
Reply
#6
(10-01-2016, 12:35 AM)X3non Wrote:
(09-30-2016, 09:06 PM)debielink Wrote: Please, how can I check the type I have at this point where the phone is already dead? All I know at this point is that the one I have is the 16gb one and not the 32gb one. Sp shows brom error :?? (0x3)

Sent from my TECNO-C8 using Hovatek mobile

use the miracle box guide @ https://forum.hovatek.com/thread-13894.html to flash only system.img or system.bin
* attach a screenshot of the SPft error

When I try to flash system with miracle box, it shows no error. Rather, it gets to writing emmc and says success without writing any other thing. Like I mentioned earlier, all that miracle box does, it does in just one second and it is finished. But the phone remains dead. Please, can you send me correct scatter file for Camon c9? Also, can you help with checksum for the rom? I tried using other programs to flash it but they either say the scatter is wrong or there's no checksum found.

Sent from my TECNO-C8 using Hovatek mobile
Reply
#7
(10-01-2016, 04:50 AM)debielink Wrote:
(10-01-2016, 12:35 AM)X3non Wrote:
(09-30-2016, 09:06 PM)debielink Wrote: Please, how can I check the type I have at this point where the phone is already dead? All I know at this point is that the one I have is the 16gb one and not the 32gb one. Sp shows brom error :?? (0x3)

Sent from my TECNO-C8 using Hovatek mobile

use the miracle box guide @ https://forum.hovatek.com/thread-13894.html to flash only system.img or system.bin
* attach a screenshot of the SPft error

When I try to flash system with miracle box, it shows no error. Rather, it gets to writing emmc and says success without writing any other thing. Like I mentioned earlier, all that miracle box does, it does in just one second and it is finished. But the phone remains dead. Please, can you send me correct scatter file for Camon c9? Also, can you help with checksum for the rom? I tried using other programs to flash it but they either say the scatter is wrong or there's no checksum found.

Sent from my TECNO-C8 using Hovatek mobile

Please try different version of Sp flash tool ... Format before flashing without preloader.bin .....
Reply
#8
(10-01-2016, 09:46 AM)ALBA Wrote:
(10-01-2016, 04:50 AM)debielink Wrote:
(10-01-2016, 12:35 AM)X3non Wrote:
(09-30-2016, 09:06 PM)debielink Wrote: Please, how can I check the type I have at this point where the phone is already dead? All I know at this point is that the one I have is the 16gb one and not the 32gb one. Sp shows brom error :?? (0x3)

Sent from my TECNO-C8 using Hovatek mobile

use the miracle box guide @ https://forum.hovatek.com/thread-13894.html to flash only system.img or system.bin
* attach a screenshot of the SPft error

When I try to flash system with miracle box, it shows no error. Rather, it gets to writing emmc and says success without writing any other thing. Like I mentioned earlier, all that miracle box does, it does in just one second and it is finished. But the phone remains dead. Please, can you send me correct scatter file for Camon c9? Also, can you help with checksum for the rom? I tried using other programs to flash it but they either say the scatter is wrong or there's no checksum found.

Sent from my TECNO-C8 using Hovatek mobile

Please try different version of Sp flash tool ... Format before flashing without preloader.bin .....

Sp flash tool says the scatter file is wrong and it just closes up. Without the scatter, I can't flash. Also, sp requires that the system be an img file, but the one provided here is bin. Does anyone a firmware backup from miracle box?

Sent from my TECNO-C8 using Hovatek mobile
Reply
#9
(10-01-2016, 11:11 AM)debielink Wrote:
(10-01-2016, 09:46 AM)ALBA Wrote:
(10-01-2016, 04:50 AM)debielink Wrote:
(10-01-2016, 12:35 AM)X3non Wrote:
(09-30-2016, 09:06 PM)debielink Wrote: Please, how can I check the type I have at this point where the phone is already dead? All I know at this point is that the one I have is the 16gb one and not the 32gb one. Sp shows brom error :?? (0x3)

Sent from my TECNO-C8 using Hovatek mobile

use the miracle box guide @ https://forum.hovatek.com/thread-13894.html to flash only system.img or system.bin
* attach a screenshot of the SPft error

When I try to flash system with miracle box, it shows no error. Rather, it gets to writing emmc and says success without writing any other thing. Like I mentioned earlier, all that miracle box does, it does in just one second and it is finished. But the phone remains dead. Please, can you send me correct scatter file for Camon c9? Also, can you help with checksum for the rom? I tried using other programs to flash it but they either say the scatter is wrong or there's no checksum found.

Sent from my TECNO-C8 using Hovatek mobile

Please try different version of Sp flash tool ... Format before flashing without preloader.bin .....

Sp flash tool says the scatter file is wrong and it just closes up. Without the scatter, I can't flash. Also, sp requires that the system be an img file, but the one provided here is bin. Does anyone a firmware backup from miracle box?

Sent from my TECNO-C8 using Hovatek mobile
Please try different stock rom from different site
Reply
#10
try this rom first, https://docs.google.com/uc?id=0B5igkFEY8...t=download. it is quite large bro. 1gig plus.
Reply










Users browsing this thread:
1 Guest(s)