Hi, Guest! Login / Register




Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

[Please help] WEIIMI P9 (MT6735) not conected via VCOM drivers

#11

(09-30-2016, 10:40 PM)ALBA Wrote:
(09-30-2016, 09:54 PM)dilbroo Wrote:
(09-30-2016, 09:43 PM)ALBA Wrote:
(09-30-2016, 09:36 PM)dilbroo Wrote:
(09-30-2016, 09:32 PM)ALBA Wrote: Try changing the USB cord and let's see

i have tried two USB cords and two PC,s problem still the same....phone showing the charging status. i have install both DA USB VCOM and PRELOADER USB VCOM drivers...plz suggest what to do
I think is a hardware problem.. take it to a hardware repairs for ur charging system repair

Actually yesterday it was connected with miracle box and i take backup and during backup sum error occur and phone gone dead. after this i keep this phone charging and but not come up after one day i connect it to pc it show 0% charging and i leave it charging when it become 1% charging i press power button and it come up again....now i hav to backup again and now it not connected to miracle box...i think phone is ok and i am making mistake somewhere else
Try backing using Sp flash tool and let's see and try changing the battery to full before backuping it..
for SP Flash tool and MTK droid tool, create scatter file optopn/tab is disable see in attached files and device information also. i am facing problem every where.



Attached Files
.jpg   Device Info.jpg (Size: 99.28 KB / Downloads: 1)
.jpg   MTK Droid Tool Scatter file option error.jpg (Size: 186.82 KB / Downloads: 1)
Reply
#12
(10-01-2016, 12:53 AM)X3non Wrote:
(09-30-2016, 11:00 PM)dilbroo Wrote: ...why it is asking again?

try this
* uninstall all vcom drivers using usb deview @ https://forum.hovatek.com/thread-7660.html
* reinstall only vcom preloader driver @ https://forum.hovatek.com/thread-440.html
* power off your device (don't connect your device yet)
* click start on miracle box
* connect your device via USB and immediately press power button once

NOTE: you must not backup every single partition (you can skip the unnecessary ones to reduce backup time)

no still not detected....once preloader driver option comes in device manager and then disappear
Reply
#13
(10-01-2016, 12:54 AM)dilbroo Wrote:
(09-30-2016, 10:40 PM)ALBA Wrote:
(09-30-2016, 09:54 PM)dilbroo Wrote:
(09-30-2016, 09:43 PM)ALBA Wrote:
(09-30-2016, 09:36 PM)dilbroo Wrote: i have tried two USB cords and two PC,s problem still the same....phone showing the charging status. i have install both DA USB VCOM and PRELOADER USB VCOM drivers...plz suggest what to do
I think is a hardware problem.. take it to a hardware repairs for ur charging system repair

Actually yesterday it was connected with miracle box and i take backup and during backup sum error occur and phone gone dead. after this i keep this phone charging and but not come up after one day i connect it to pc it show 0% charging and i leave it charging when it become 1% charging i press power button and it come up again....now i hav to backup again and now it not connected to miracle box...i think phone is ok and i am making mistake somewhere else
Try backing using Sp flash tool and let's see and try changing the battery to full before backuping it..
for SP Flash tool and MTK droid tool, create scatter file optopn/tab is disable see in attached files and device information also. i am facing problem every where.

Click on block map and the window that pops up, then u create the scatter file
Reply
#14
(10-01-2016, 09:31 AM)ALBA Wrote:
(10-01-2016, 12:54 AM)dilbroo Wrote:
(09-30-2016, 10:40 PM)ALBA Wrote:
(09-30-2016, 09:54 PM)dilbroo Wrote:
(09-30-2016, 09:43 PM)ALBA Wrote: I think is a hardware problem.. take it to a hardware repairs for ur charging system repair

Actually yesterday it was connected with miracle box and i take backup and during backup sum error occur and phone gone dead. after this i keep this phone charging and but not come up after one day i connect it to pc it show 0% charging and i leave it charging when it become 1% charging i press power button and it come up again....now i hav to backup again and now it not connected to miracle box...i think phone is ok and i am making mistake somewhere else
Try backing using Sp flash tool and let's see and try changing the battery to full before backuping it..
for SP Flash tool and MTK droid tool, create scatter file optopn/tab is disable see in attached files and device information also. i am facing problem every where.

Click on block map and the window that pops up, then u create the scatter file

Dear bro, after clicking on block map, create scatter file option is not highlighted or disabled. I have attached screenshot. You can see the disable option for create scatter file.
Reply
#15
(10-01-2016, 09:50 AM)dilbroo Wrote:
(10-01-2016, 09:31 AM)ALBA Wrote:
(10-01-2016, 12:54 AM)dilbroo Wrote:
(09-30-2016, 10:40 PM)ALBA Wrote:
(09-30-2016, 09:54 PM)dilbroo Wrote: Actually yesterday it was connected with miracle box and i take backup and during backup sum error occur and phone gone dead. after this i keep this phone charging and but not come up after one day i connect it to pc it show 0% charging and i leave it charging when it become 1% charging i press power button and it come up again....now i hav to backup again and now it not connected to miracle box...i think phone is ok and i am making mistake somewhere else
Try backing using Sp flash tool and let's see and try changing the battery to full before backuping it..
for SP Flash tool and MTK droid tool, create scatter file optopn/tab is disable see in attached files and device information also. i am facing problem every where.

Click on block map and the window that pops up, then u create the scatter file

Dear bro, after clicking on block map, create scatter file option is not highlighted or disabled. I have attached screenshot. You can see the disable option for create scatter file.
Please which type of Windows and operating system u are using....
Reply
#16
(This post was last modified: 10-02-2016, 09:51 AM by hovatek. )
(10-01-2016, 09:50 AM)dilbroo Wrote: Dear bro, after clicking on block map, create scatter file option is not highlighted or disabled. I have attached screenshot. You can see the disable option for create scatter file.

MTK Droid tools wont work for your phone. You'll need to stick to Miracle Box
BTW, have you tried https://hovatek.com/redirect.php?link=ht...weiimi-p9/
Need further assistance? Speak with a Hovatek Representative:
Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)
Reply
#17
(10-01-2016, 11:45 AM)ALBA Wrote:
(10-01-2016, 09:50 AM)dilbroo Wrote:
(10-01-2016, 09:31 AM)ALBA Wrote:
(10-01-2016, 12:54 AM)dilbroo Wrote:
(09-30-2016, 10:40 PM)ALBA Wrote: Try backing using Sp flash tool and let's see and try changing the battery to full before backuping it..
for SP Flash tool and MTK droid tool, create scatter file optopn/tab is disable see in attached files and device information also. i am facing problem every where.

Click on block map and the window that pops up, then u create the scatter file

Dear bro, after clicking on block map, create scatter file option is not highlighted or disabled. I have attached screenshot. You can see the disable option for create scatter file.
Please which type of Windows and operating system u are using....

I have two pc's. One is windows7 64 bit and other is windows7 32 bit
Reply
#18
(10-02-2016, 12:08 PM)dilbroo Wrote:
(10-01-2016, 11:45 AM)ALBA Wrote:
(10-01-2016, 09:50 AM)dilbroo Wrote:
(10-01-2016, 09:31 AM)ALBA Wrote:
(10-01-2016, 12:54 AM)dilbroo Wrote: for SP Flash tool and MTK droid tool, create scatter file optopn/tab is disable see in attached files and device information also. i am facing problem every where.

Click on block map and the window that pops up, then u create the scatter file

Dear bro, after clicking on block map, create scatter file option is not highlighted or disabled. I have attached screenshot. You can see the disable option for create scatter file.
Please which type of Windows and operating system u are using....

I have two pc's. One is windows7 64 bit and other is windows7 32 bit

Which process did u used to install the vcom drivers

Reply
#19
(10-02-2016, 12:52 PM)ALBA Wrote:
(10-02-2016, 12:08 PM)dilbroo Wrote:
(10-01-2016, 11:45 AM)ALBA Wrote:
(10-01-2016, 09:50 AM)dilbroo Wrote:
(10-01-2016, 09:31 AM)ALBA Wrote: Click on block map and the window that pops up, then u create the scatter file

Dear bro, after clicking on block map, create scatter file option is not highlighted or disabled. I have attached screenshot. You can see the disable option for create scatter file.
Please which type of Windows and operating system u are using....

I have two pc's. One is windows7 64 bit and other is windows7 32 bit

Which process did u used to install the vcom drivers
I have uninstall all vcom drivers using usb deview and disable the windows publisher verification and restart my laptop and  then i manually install the driver right click on item in device manager and go to add legacy hardware then select install driver manually then have a disk and choose the driver destination path and select preloader vcom drivers.

One more thing hovatek rep also access my pc and tried to installed the driver but no success.
Reply
#20
(10-02-2016, 09:48 AM)hovatek Wrote:
(10-01-2016, 09:50 AM)dilbroo Wrote: Dear bro, after clicking on block map, create scatter file option is not highlighted or disabled. I have attached screenshot. You can see the disable option for create scatter file.

MTK Droid tools wont work for your phone. You'll need to stick to Miracle Box
BTW, have you tried https://hovatek.com/redirect.php?link=ht...weiimi-p9/

Hovatek is saying something here try follow him too??
Reply










Users browsing this thread:
1 Guest(s)