09-30-2016, 11:47 PM
Hi, every one
I have a weird problems. Since two weeks I'm trying to flash This MTN S620 with no success. Here is the story.
The phone was updated to Android 5.1 and was encrypted.
After a hard reset the phone was asking the google account to unblock the phone.
So I decide to flash it with stock android 5.1. So I downloaded it from the link in this forum.
The first time I flashed it it gave me an brom error 4032 error at the very beginning (after DA DL). So I retry and format first the phone. That time the flash was a succes with the ok circle poping at the end of the process. But after I remove the battery and insert it the phone was dead. No charging, no booting
The first thing that I noticed is that the PC was still detecting it.
The second thing is that the detection was different from before the flash. When I plug it to the PC it keep connecting and disconnecting every 2-3 secs no matter what button I push or not. Note that before the flash when the phone was detected It stayed still no matter even before I start the flashing process.
So I decided to flash it again but since two weeks when I try I got a brom error 4032. I've tried to reinstall the mtk drivers, install another version of mtk drivers, try 3 differents version of spflash, try differents computers with differents OS (Win8 x64 , win 7 x86, win 10 x64, win xp), I've try the stock android 4.2 in this forum and try another firmware from romkings. I always get the same brom error 4032 after DA DL. I even try another fullcharged battery from another working s620 to be sure that it was not the battery. Nothing till now.
Now I think my phone got hard bricked I don t konw how or it is another hardware problem.
Did someone have a clue???!!!