Hi, Guest! Login / Register




Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

[Please help] Dead tecno y6

#1

The phone just suddenly went off without coming back on. Its not rooted and i never tried rooting it, neither did i try any software prank on it. I tried repairing it with hardware phone repairers but all to no avail. then i tried connecting it to the system with the battery on, not reading; i removed the battery and the system saw it has mt6xx preloader. I don't know if flashing it can make it work again or what else can i do?


Reply
#2
(10-24-2016, 10:21 AM)Akiak Wrote: The phone just suddenly went off without coming back on. Its not rooted and i never tried rooting it, neither did i try any software prank on it. I tried repairing it with hardware phone repairers but all to no avail. then i tried connecting it to the system with the battery on, not reading; i removed the battery and the system saw it has mt6xx preloader. I don't know if flashing it can make it work again or what else can i do?

you might still be able to revive it:
First, lets see how much life it has left.

1. Download the firmware @ https://forum.hovatek.com/thread-311.html
2. Without the battery in the phone, try backing it up in scatter format using https://forum.hovatek.com/thread-13347.html

waiting...
Reply
#3
(10-24-2016, 10:21 AM)Akiak Wrote: i tried the miracle app method but i was getting an error message that '' boot not support the phone or bad CPU'.. So, what should i do next??
Reply
#4
(10-26-2016, 12:20 AM)Akiak Wrote: i tried the miracle app method but i was getting an error message that '' boot not support the phone or bad CPU'.. So, what should i do next??

Try this tool @ https://forum.hovatek.com/thread-15723.html
for both Miracle and Aladdin, ensure the battery isn't in the phone when connecting
Reply
#5
What should after the backup has being successful?
Reply
#6
(10-27-2016, 02:13 PM)Akiak Wrote: What should after the backup has being successful?

Next up will be to try flashing the firmware @ https://forum.hovatek.com/thread-311.html
Reply
#7
I've tried backing it up with aladdin box too... But i get a "phone ack error" with or w/o the battery inside the phone... I went ahead to try flashing it but i get a 's_brom_chksum16_mem_result_diff(2020)" error.... I've tried all possible solutions available on the website to the error but its still not working although i once got a "sft_enable_dram_fail" error too but it was only once.. After that, it was back to (2020) error
Reply
#8
Also, whenever i try doing a firmware upgrade or format all+download, the flashtool doesn't read at all. Even when i pressed the volume buttons, it still doesn't respond. i've also tried flashing w/o battery option, still the same (2020) error
Reply
#9
(10-29-2016, 01:55 AM)Akiak Wrote: Also, whenever i try doing a firmware upgrade or format all+download, the flashtool doesn't read at all. Even when i pressed the volume buttons, it still doesn't respond. i've also tried flashing w/o battery option, still the same (2020) error

Lets hope its not the emmc chip.
can you get access to a working Y6?
Reply
#10
I can get sir
Reply










Users browsing this thread:
1 Guest(s)