Hi, Guest! Login / Register    




Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

[Downloads] MY Infinix Race Bolt Q X451 IS TOCKED N INFINIX LOGO AND RESTARTS

#1

My Infinix Race Bolt Q X451 just developed that problem, i really don't know what caused it.

I need permission to download the stock mtk backup.
I also want to know how to identify an old Tecno M3 4.2 and New M3 4.2.
I'll also be needing the rom for it after the identification.
Thanks


Reply
#2
(02-25-2015, 02:07 PM)vick Wrote: My Infinix Race Bolt Q X451 just developed that problem, i really don't know what caused it.

I need permission to download the stock mtk backup.
I also want to know how to identify an old Tecno M3 4.2 and New M3 4.2.
I'll also be needing the rom for it after the identification.
Thanks

For the Infinix X451, supply a gmail address for me to grant
for the Tecno m3, please, create a new thread about that to avoid a mixup.
Reply
#3
(02-25-2015, 05:26 PM)hovatek Wrote:
(02-25-2015, 02:07 PM)vick Wrote: My Infinix Race Bolt Q X451 just developed that problem, i really don't know what caused it.

I need permission to download the stock mtk backup.
I also want to know how to identify an old Tecno M3 4.2 and New M3 4.2.
I'll also be needing the rom for it after the identification.
Thanks

For the Infinix X451, supply a gmail address for me to grant
for the Tecno m3, please, create a new thread about that to avoid a mixup.

[email protected]
Reply
#4
(02-26-2015, 10:54 AM)vick Wrote: [email protected]

granted! download @ https://forum.hovatek.com/thread-533.html and flash using Sp flash tool @ https://forum.hovatek.com/thread-159.html
Reply
#5
(02-26-2015, 02:25 PM)hovatek Wrote:
(02-26-2015, 10:54 AM)vick Wrote: [email protected]

granted! download @  https://forum.hovatek.com/thread-533.html and flash using Sp flash tool @  https://forum.hovatek.com/thread-159.html

After i flashed the ROM into my infinix x451, i powered it on and it was displaying PureXperia Z2 and it'll restart over and over
.png   boot up.PNG (Size: 340.96 KB / Downloads: 10)
I removed the battery and replace the battery, then i plugged it to my laptop just to see if it could charge, To my surprise, it was Xperia again
.png   charging.PNG (Size: 367.54 KB / Downloads: 9)
Please I think the Rom is not For Infinix X451
Reply
#6
(02-26-2015, 06:59 PM)vick Wrote:
(02-26-2015, 02:25 PM)hovatek Wrote:
(02-26-2015, 10:54 AM)vick Wrote: [email protected]

granted! download @  https://forum.hovatek.com/thread-533.html and flash using Sp flash tool @  https://forum.hovatek.com/thread-159.html

After i flashed the ROM into my infinix x451, i powered it on and it was displaying PureXperia Z2 and it'll restart over and over
I removed the battery and replace the battery, then i plugged it to my laptop just to see if it could charge, To my surprise, it was Xperia again
Please I think the Rom is not For Infinix X451

it is for experia Z2
Reply
#7
(This post was last modified: 02-26-2015, 07:41 PM by hovatek. )
(02-26-2015, 06:59 PM)vick Wrote: After i flashed the ROM into my infinix x451, i powered it on and it was displaying PureXperia Z2 and it'll restart over and over
I removed the battery and replace the battery, then i plugged it to my laptop just to see if it could charge, To my surprise, it was Xperia again
Please I think the Rom is not For Infinix X451
(02-26-2015, 07:11 PM)vick Wrote: it is for experia Z2
thats incorrect. what you're seeing is a boot animation and flashing the stock logo.bin would remove that. charge your battery properly first.
how exactly did the phone get bricked?
Reply
#8
Okay, the phone was off, it was switched on and it started showing infinix and restarting back to the infinix logo
Reply
#9
(This post was last modified: 02-27-2015, 11:18 AM by hovatek. )
have you tried a factory reset and battery pull?
Reply
#10
(02-27-2015, 10:53 AM)hovatek Wrote: have you tried a factory reset and battery pull?

factory reset is not possible since it's not entering recovery mode nor fastboot mode, it's just displaying the Xperial and restarting.
As for battery Pull method, I don't know how to do that.
Reply










Users browsing this thread:
1 Guest(s)