- Setup ADB Fastboot using https://forum.hovatek.com/thread-588.html
- Enable USB debugging on the phone using https://forum.hovatek.com/thread-10109.html
- Launch ADB and run the following command
- Authorize ADB on your device then boot the phone into Fastboot using
- In Fastboot, check that the device is detected using
- Relock the Bootloader by running the command below
fastboot oem lock
- Press the Volume increase button to confirm lock.
- You'll then be taken to a screen with three options ; fastboot, recovery and normal.
- Hold the power button till the phone reboots
- Wait while the phone boots up (might take a while so be patient)
- Setup the phone once booted