04-27-2015, 09:28 PM
How to flash infinix hot x507 stock rom using sp flash tool / unbrick your x507:
I managed to flash the stock rom for my infinix hot x507 using the stock rom provided by Hovatek from here: https://forum.hovatek.com/thread-533.html and using the sp flash tool from this topic, following all the procedures provided here "tried to flash system only and system with preloader" and my phone just bricked and won't power off, neither detected by pc or charging anymore.
and when plugging the phone to the pc it's not connect properly just keep plugging and unplugging automatically every 2 seconds.
Here's the solution and what I've done exactly to unbrick it:
1- open sp flash tool and start format "as it's explained in the topic", take off your battery and connect the phone to pc, sp flash tool will give you an error, unplug the phone, start format again, put the battery back and plug your phone again, this time sp flash tool will detect your phone and format it, unplug the phone, close sp flash tool, take the battery off and put it back.
2- open sp flash tool and load the "Scatter file - it's explained in the topic here", select all except "CACHE and USRDATA", press download, and connect your phone to the pc, wait till it's finished and unplug the phone.
3- now your phone should start booting normally, but you might end up with a boot loop, in this case take the battery off, and put it back, press the power button and volume down at the same time until you enter the stock recovery mode, select english, then clear eMMC, reboot your phone, and finally your phone is getting back to life and booting normally.
*Note: it takes almost 5 minutes for the first boot, so lay back and stay patient...
Special thanks to Hovatek for his great efforts, tutorials and support.