Hovatek Forum MOBILE Android [Tutorial] How to use SP Flash Tool to flash Mediatek firmware
Can't login? Please, reset your password.
Hovatek is recruiting! Apply Now


[Tutorial] How to use SP Flash Tool to flash Mediatek firmware

[Tutorial] How to use SP Flash Tool to flash Mediatek firmware

Pages (42): Previous 119 20 21 22 2342 Next
Elvi Hidayat
Elvi Hidayat
Elvi Hidayat
Newbie
3
25-09-2015, 03:08 PM



Please help me
My phone OPPO R1001
Error : flash nand was not detected
Please solution
Elvi Hidayat
Elvi Hidayat
Elvi Hidayat
Newbie
3
25-09-2015, 03:11 PM
Hello hovatek
Please help me solution
mickybonez
mickybonez
mickybonez
Enthusiastic Member
14
25-09-2015, 05:50 PM
wow.... this is beautiful mickybonez@gmail.com
notmi
notmi
notmi
Junior Member
20
08-10-2015, 05:09 PM
(19-03-2014, 01:51 PM)hovatek SP Flash tool is an application you could find very useful in fixing extreme cases of a bricked MTK Android (e.g Tecno, Gionee, Infinix, Opsson, Innjoo etc) like the phone not coming on at all or not booting into recovery mode etc. Lets get started:

Requirement

* A PC
* USB Cord
* Manually install VCOM drivers on the PC ( https://www.hovatek.com/forum/thread-440.html)
* The phone you wish to flash the files to (ensure there's an SD card in the phone)
* Scatter file + files to be flashed ( see http://www.hovatek.com/forum/thread-468.html for how to make an MTK Backup). 
* Download SP Flash tool @ http://adf.ly/1N1RLu or @ http://adf.ly/1NonvW (for the newer SoCs like 64 bit MT67** )

Note

* If you get any error in SP Flash tool or the phone still didn't work after flashing then there's a list of SP Flash Tool errors, their meanings and how to resolve them @ http://www.hovatek.com/forum/thread-439.html
* If you accidentally interrupted flashing and the phone goes dead, follow the guide @ https://www.hovatek.com/forum/thread-808.html




# See the video tutorial below or @ http://youtu.be/LzyYXAflmOk



Procedure 

1. Remove the battery from the phone and slot it back in without booting the phone (If the battery is inbuilt then simply switch if off). Also, ensure there's a formatted SD card in the phone (if there's an SD card slot)
2. Launch SP Flash Tool as Administrator

[Image: how-to-use-sp-flash-tool-1.jpg]

3. Click on Scatter-loading by the right

[Image: how-to-use-sp-flash-tool-2.jpg]

4. In the window that pops up, select the scatter file for your phone model then click Open (scatter file is a text file with the word "scatter" in its name )

[Image: how-to-use-sp-flash-tool-3.jpg]

5. A list with ticked boxes should appear in SP flash tool (preloader, mbr, ebr etc)

[Image: how-to-use-sp-flash-tool-4.jpg]

6. ~~~~

Step 6 is only for when you wish to format the phone. Skip if you don't wish to format
Warning! Do Not format unless you have the stock ROM for your exact phone model.

6a. Click Format at the top
6b. After clicking Format, a dialogue box will pop up, ensure that 'Auto Format Flash' and 'Format whole flash without Bootloader' are selected
6c. Click OK, Stop should now be red or green in color
6d. Connect the switched off phone (with battery inside) to the PC via USB cord
6e. A progress bar should load till you get a 'Success' message (green circle with OK)
6f. Disconnect the phone from PC

~~~~~~

7. Untick the box in front of any item you do not wish to flash

[Image: how-to-use-sp-flash-tool-5.jpg]

8. To manually load an item that doesn't automatically get ticked after loading the scatter file, tick the box in front of that item then double-click its Location and select the corresponding file in the window that pops up
9. Once the file(s) you wish to flash is (are) ticked, click Download (with an arrow above it)

[Image: how-to-use-sp-flash-tool-5.jpg]

10. Stop should now be prominent while other options should be grayed out
11. Connect the switched off phone (with battery inside) to the PC via USB cord
12. A progress bar should start running

[Image: how-to-use-sp-flash-tool-6.jpg]

13. Wait till you get a Success message (green circle with OK), do not interrupt before then

[Image: how-to-use-sp-flash-tool-7.jpg]

14. Disconnect the phone, remove the battery for 15 seconds (if removable), slot it back in then power up the phone
15. Ensure to do a factory reset in recovery mode to clear any errors
i'm following the step. It worked, but after i turned on the phone, it just bootloop... How to fix it ??
X3non
X3non
X3non
Recognized Contributor
22,062
08-10-2015, 06:02 PM



(08-10-2015, 05:09 PM)notmi i'm following the step. It worked, but after i turned on the phone, it just bootloop... How to fix it ??

you've been replied @ https://www.hovatek.com/forum/thread-921...54508.html
This post was last modified: 08-10-2015, 06:06 PM by X3non.
jjonaivi
jjonaivi
jjonaivi
Junior Member
38
09-10-2015, 04:51 PM
please why is d md3 file showing 0kb. after backing up d stock ROM of a working m3 using mtkdroid, I tried selecting d "prepare files to flash" option& picking d md3 file, but it keeps giving me an error msg. wen I tried using d scattered file from d backup ROM with splash, I her a BROM error. DRAM fail.pls I need your help. am a newbie here
jjonaivi
jjonaivi
jjonaivi
Junior Member
38
09-10-2015, 04:54 PM
d m3 am trying to flash is totally dead. I mistakingly formated d ROM, although I enabled USB debugging b4 it got bricked. I HV also installed mtkdriver correctly. d only problem I HV is in getting d right files to flash.
hovatek
hovatek
hovatek
Administrator
49,570
09-10-2015, 05:44 PM
(09-10-2015, 04:54 PM)jjonaivi d m3 am trying to flash is totally dead. I mistakingly formated d ROM, although I enabled USB debugging b4 it got bricked. I HV also installed mtkdriver correctly. d only problem I HV is in getting d right files to flash.

create a new thread so we focus on this

see https://www.hovatek.com/forum/thread-514.html for how to create a thread

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.
efeghe4life
efeghe4life
efeghe4life
Newbie
2
23-10-2015, 08:28 AM
How do I upgrade my infinix hot x507 to the new version

Sent from my Infinix X507 using Tapatalk
efeghe4life
efeghe4life
efeghe4life
Newbie
2
23-10-2015, 08:34 AM



How do I upgrade my infinix hot x507 to the new version pls

Sent from my Infinix X507 using Tapatalk
Pages (42): Previous 119 20 21 22 2342 Next
Users browsing this thread:
 2 Guest(s)
Users browsing this thread:
 2 Guest(s)
YtWhTl
live chat
whatsapp telegram instagram