[Tutorial] How to use SP Flash Tool to flash Mediatek firmware
[Tutorial] How to use SP Flash Tool to flash Mediatek firmware
(28-01-2016, 02:00 PM)amit_tom sir plz help me out....... plz upload gionee e7 scatter file....asap
(29-01-2016, 01:13 PM)amit_tom The link you provided does not contain scatter file...i have downloaded this stock rom....
(03-02-2016, 07:26 AM)faizalshuhibe DEAR
IALSO HAVE THE SIMILIAR ISSUE IN MY LAVA IRIS X8Q PHONE WHILE USING SPFLASH TOOL I ACCIDENTALLY FORMATTED THE FLASH MEMORY AND AFTER THAT I HAVE FLASHED IT WITH A STOCK ROM(DOWNLOADED FROM INTERNET)USING SP FLASH TOOL .THOUGH I WAS ABLE TO SUCCESFULLY COMPLETE THE FLASHING PROCESS, THE SCREEN IS STILL IN BLACK COLOUR,WHILE CHECKING THE MEMORY TEST OPTION IN SP FLASHING TOOL IT WAS FOUND AN ERROR: NAND FLASH NOT DETECTED.COULD ANY ONE HELP ME TO SORT THIS PROBLEM.AS IAM A NEWBIE I DIDNT HAVE ANY BACK OF THE DEVICE WITH ME...PLEASE HELP...
(19-03-2014, 01:51 PM)hovatek SP Flash tool is an application you could find very useful in fixing extreme cases of a bricked MTK Android (e.g Tecno, Gionee, Infinix, Opsson, Innjoo etc) like the phone not coming on at all or not booting into recovery mode etc. Lets get started:
Requirement
* A PC
* USB Cord
* Manually install VCOM drivers on the PC ( https://www.hovatek.com/forum/thread-440.html)
* The phone you wish to flash the files to (ensure there's an SD card in the phone)
* Scatter file + files to be flashed ( see http://www.hovatek.com/forum/thread-468.html for how to make an MTK Backup).
* Download SP Flash tool @ http://adf.ly/1VTJkh
Note
* If you get any error in SP Flash tool or the phone still didn't work after flashing then there's a list of SP Flash Tool errors, their meanings and how to resolve them @ http://www.hovatek.com/forum/thread-439.html
* If you accidentally interrupted flashing and the phone goes dead, follow the guide @ https://www.hovatek.com/forum/thread-808.html
# See the video tutorial below or @ http://youtu.be/LzyYXAflmOk
Procedure
1. Remove the battery from the phone and slot it back in without booting the phone (If the battery is inbuilt then simply switch if off). Also, ensure there's a formatted SD card in the phone (if there's an SD card slot)
2. Launch SP Flash Tool as Administrator
3. Click on Scatter-loading by the right
4. In the window that pops up, select the scatter file for your phone model then click Open (scatter file is a text file with the word "scatter" in its name )
5. A list with ticked boxes should appear in SP flash tool (preloader, mbr, ebr etc)
6. ~~~~
Step 6 is only for when you wish to format the phone. Skip if you don't wish to format
Warning! Do Not format unless you have the stock ROM for your exact phone model.
6a. Click Format at the top
6b. After clicking Format, a dialogue box will pop up, ensure that 'Auto Format Flash' and 'Format whole flash without Bootloader' are selected
6c. Click OK, Stop should now be red or green in color
6d. Connect the switched off phone (with battery inside) to the PC via USB cord
6e. A progress bar should load till you get a 'Success' message (green circle with OK)
6f. Disconnect the phone from PC
~~~~~~
7. Untick the box in front of any item you do not wish to flash
8. To manually load an item that doesn't automatically get ticked after loading the scatter file, tick the box in front of that item then double-click its Location and select the corresponding file in the window that pops up
9. Once the file(s) you wish to flash is (are) ticked, click Download (with an arrow above it)
10. Stop should now be prominent while other options should be grayed out
11. Connect the switched off phone (with battery inside) to the PC via USB cord
12. A progress bar should start running
13. Wait till you get a Success message (green circle with OK), do not interrupt before then
14. Disconnect the phone, remove the battery for 15 seconds (if removable), slot it back in then power up the phone
15. Ensure to do a factory reset in recovery mode to clear any errors
(13-02-2016, 11:33 PM)tizkid pls i,m getting errors when trying to load your preloaded tecno h5 on sp flash tool. what should i do
(13-10-2014, 12:48 AM)hovatek(12-10-2014, 11:55 PM)giftium Pls i need help.
I installed Hfont on my tecno P5 n it got bricked (i.e booting n stopping at tecno logo). I tried flashing,clearing/wipe data&cache, factory reset; still stucked at boot logo. I gave it 4 repair, d repairer worked it but i still bricked it again with hfont. Gave it to him again to repair but this time the phone went totally dead( not charging,booting). Av tried using sp flash tool to format n flash the files(preloader,msr,esr1,uboot,bootimg,logo et al), but it is showing me Error 4032
Message: BROM ERROR : S_FT_ENABLE_DRAM_FAIL (4032) [EMI] Enable DRAM fail. Am using d correct scatter file(P5) downloaded frm dis site, Preloader.bin,uboot.bin,bootimg,esr et al still downloaded 4 p5 frm dis site. Although i dont av a stock rom: mtk backup/downloaded, so i didnt tick user data & cache wen flashing d files. Evn wen trying to format only, it will in 1 sec reach 100% with red and after 1.51 secs will show Error 4032
Message: BROM ERROR : S_FT_ENABLE_DRAM_FAIL (4032) [EMI] Enable DRAM fail. Pls help, am using sp flash tool downloaded from this site too...
please, create a new thread by clicking. http://www.hovatek.com/forum/newthread.php?fid=4