Hi, Guest! Login / Register




Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

[Please help] HUAWEI y600-u20 dead stock recovery

#1

I just want to ask if you're experiencing blinking android on stock recovery.My phone is Huawei y600-u20 dual sim smartphone. At first bootloop i tried flashing using update.zip on stock recovery and it works fine but after installing camera 360 lite, my phone boots and it's stuck on the logo and when I tried to enter recovery mode the android logo with no command keeps blinking, I can't execute any command. I tried reflashing the same rom i flash at first bootloop but it didn't work anymore. I also tried reflashing it with other stock roms and still no luck. If you have any idea, please do help me how to fix it.


Reply
#2
(11-12-2016, 10:46 AM)oyensian11 Wrote: I just want to ask if you're experiencing blinking android on stock recovery.My phone is Huawei y600-u20 dual sim smartphone. At first bootloop i tried flashing using update.zip on stock recovery and it works fine but after installing camera 360 lite, my phone boots and it's stuck on the logo and when I tried to enter recovery mode the android logo with no command keeps blinking, I can't execute any command. I tried reflashing the same rom i flash at first bootloop but it didn't work anymore. I also tried reflashing it with other stock roms and still no luck. If you have any idea, please do help me how to fix it.

Boot into factory mode (vol down + power ) and wipe emmc
Need further assistance? Speak with a Hovatek Representative:
Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)
Reply
#3
(11-12-2016, 01:35 PM)hovatek Wrote:
(11-12-2016, 10:46 AM)oyensian11 Wrote: I just want to ask if you're experiencing blinking android on stock recovery.My phone is Huawei y600-u20 dual sim smartphone. At first bootloop i tried flashing using update.zip on stock recovery and it works fine but after installing camera 360 lite, my phone boots and it's stuck on the logo and when I tried to enter recovery mode the android logo with no command keeps blinking, I can't execute any command. I tried reflashing the same rom i flash at first bootloop but it didn't work anymore. I also tried reflashing it with other stock roms and still no luck. If you have any idea, please do help me how to fix it.

Boot into factory mode (vol down + power ) and wipe emmc

i cant boot my phone to factory mode.. that's why i can't execute any command.
Reply
#4
(11-13-2016, 03:00 AM)oyensian11 Wrote:
(11-12-2016, 01:35 PM)hovatek Wrote:
(11-12-2016, 10:46 AM)oyensian11 Wrote: I just want to ask if you're experiencing blinking android on stock recovery.My phone is Huawei y600-u20 dual sim smartphone. At first bootloop i tried flashing using update.zip on stock recovery and it works fine but after installing camera 360 lite, my phone boots and it's stuck on the logo and when I tried to enter recovery mode the android logo with no command keeps blinking, I can't execute any command. I tried reflashing the same rom i flash at first bootloop but it didn't work anymore. I also tried reflashing it with other stock roms and still no luck. If you have any idea, please do help me how to fix it.

Boot into factory mode (vol down + power ) and wipe emmc

i cant boot my phone to factory mode.. that's why i can't execute any command.

i did flash it with a new rom where CWM is the recovery mode but  when i try to wipe emmc it says "Error mounting emmc" Skipping format.. what to do?
Reply
#5
(11-13-2016, 06:30 AM)oyensian11 Wrote: i did flash it with a new rom where CWM is the recovery mode but  when i try to wipe emmc it says "Error mounting emmc" Skipping format.. what to do?

Hope you know that recovery and factory mode are different?
What button combos are you using?

Need further assistance? Speak with a Hovatek Representative:
Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)
Reply
#6
(11-13-2016, 04:12 PM)hovatek Wrote: [quote='oyensian11' pid='92530' dateline='1479015009']
i did flash it with a new rom where CWM is the recovery mode but  when i try to wipe emmc it says "Error mounting emmc" Skipping format.. what to do?

Hope you know that recovery and factory mode are different?
What button combos are you using?
[/quoquote]

vol up + power.. nothing happens when i press vol down + power. it just stucks at huawei logo.
Reply
#7
(This post was last modified: 11-14-2016, 11:00 AM by hovatek. )
(11-13-2016, 04:35 PM)oyensian11 Wrote: vol up + power.. nothing happens when i press vol down + power. it just stucks at huawei logo.

Ok. I believe yours is the Mediatek variant.
have you tried downloading the firmware in SP flash tool format and flashing? Instead of update.zip
Need further assistance? Speak with a Hovatek Representative:
Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)
Reply
#8
(11-14-2016, 10:58 AM)hovatek Wrote:
(11-13-2016, 04:35 PM)oyensian11 Wrote: vol up + power.. nothing happens when i press vol down + power. it just stucks at huawei logo.

Ok. I believe yours is the Mediatek variant.
have you tried downloading the firmware in SP flash tool format and flashing? Instead of update.zip

yes.. I've tried flashing it with SpFlash tool but nothing happened..
Reply
#9
(This post was last modified: 11-15-2016, 10:26 AM by hovatek. )
(11-14-2016, 11:00 PM)oyensian11 Wrote: yes.. I've tried flashing it with SpFlash tool but nothing happened..

could you elaborate on what you mean by nothing happened.
is it that flashing wasn't successful or it was successful but had no efffect?
Did you try the one @ https://forum.hovatek.com/thread-13012.html
Need further assistance? Speak with a Hovatek Representative:
Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)
Reply










Users browsing this thread:
1 Guest(s)