Hi, Guest! Login / Register




Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

[Please help] tecno p9 not charging after flashing

#1
(This post was last modified: 11-14-2016, 10:42 PM by chikaubah. )

hello friends how is going over there i just flash my tecno p9 P9-T102-20140712 version 4.4.2

but agter flashed it wont charget pass 8 percent here is a full details of the device


 
Please Hold "ON" to connect with the phone...
  Connected to Phone.
  CPU: MT6582 SW:0001 Ver: CA01
  Downloading Boot8 ...
  EMMC Size: 0x03A3E00000
  Flash Type: EMMC
  INT/EXT RAM  Size: 0x0+0x0
  Reading infr(EMMC)...
  idTongue9-T102-20140712
  version:4.4.2
  model:TECNO P9
  brand:TECNO
  manufacturer:TECNO
  PRELOADER  BaseAddr:0x0  Size:0x1400000
  MBR  BaseAddr:0x1400000  Size:0x80000
  EBR1  BaseAddr:0x1480000  Size:0x80000
  PRO_INFO  BaseAddr:0x1500000  Size:0x300000
  NVRAM  BaseAddr:0x1800000  Size:0x500000
  PROTECT_F  BaseAddr:0x1D00000  Size:0xA00000
  PROTECT_S  BaseAddr:0x2700000  Size:0xA00000
  SECCFG  BaseAddr:0x3100000  Size:0x20000
  UBOOT  BaseAddr:0x3120000  Size:0x60000
  BOOTIMG  BaseAddr:0x3180000  Size:0x600000
  RECOVERY  BaseAddr:0x3780000  Size:0x600000
  SEC_RO  BaseAddr:0x3D80000  Size:0x600000
  MISC  BaseAddr:0x4380000  Size:0x80000
  LOGO  BaseAddr:0x4400000  Size:0x300000
  EBR2  BaseAddr:0x4700000  Size:0x80000
  EXPDB  BaseAddr:0x4780000  Size:0xA00000
  ANDROID  BaseAddr:0x5180000  Size:0x46400000
  CACHE  BaseAddr:0x4B580000  Size:0x7E00000
  USRDATA  BaseAddr:0x53380000  Size:0x2EE00000
  FAT  BaseAddr:0x82180000  Size:0x321380000
  BMTPOOL  BaseAddr:0xFFFF0000  Size:0x1500000
>>Done.



plz help me i even downloaded an lkb bin file and replace but still no solution


Reply
#2
(11-14-2016, 10:30 PM)chikaubah Wrote: hello friends how is going over there i just flash my tecno p9 P9-T102-20140712 version 4.4.2

but agter flashed it wont charget pass 8 percent here is a full details of the device


 
Please Hold "ON" to connect with the phone...
  Connected to Phone.
  CPU: MT6582 SW:0001 Ver: CA01
  Downloading Boot8 ...
  EMMC Size: 0x03A3E00000
  Flash Type: EMMC
  INT/EXT RAM  Size: 0x0+0x0
  Reading infr(EMMC)...
  idTongue9-T102-20140712
  version:4.4.2
  model:TECNO P9
  brand:TECNO
  manufacturer:TECNO
  PRELOADER  BaseAddr:0x0  Size:0x1400000
  MBR  BaseAddr:0x1400000  Size:0x80000
  EBR1  BaseAddr:0x1480000  Size:0x80000
  PRO_INFO  BaseAddr:0x1500000  Size:0x300000
  NVRAM  BaseAddr:0x1800000  Size:0x500000
  PROTECT_F  BaseAddr:0x1D00000  Size:0xA00000
  PROTECT_S  BaseAddr:0x2700000  Size:0xA00000
  SECCFG  BaseAddr:0x3100000  Size:0x20000
  UBOOT  BaseAddr:0x3120000  Size:0x60000
  BOOTIMG  BaseAddr:0x3180000  Size:0x600000
  RECOVERY  BaseAddr:0x3780000  Size:0x600000
  SEC_RO  BaseAddr:0x3D80000  Size:0x600000
  MISC  BaseAddr:0x4380000  Size:0x80000
  LOGO  BaseAddr:0x4400000  Size:0x300000
  EBR2  BaseAddr:0x4700000  Size:0x80000
  EXPDB  BaseAddr:0x4780000  Size:0xA00000
  ANDROID  BaseAddr:0x5180000  Size:0x46400000
  CACHE  BaseAddr:0x4B580000  Size:0x7E00000
  USRDATA  BaseAddr:0x53380000  Size:0x2EE00000
  FAT  BaseAddr:0x82180000  Size:0x321380000
  BMTPOOL  BaseAddr:0xFFFF0000  Size:0x1500000
>>Done.



plz help me i even downloaded an lkb bin file and replace but still no solution

We'll work on uploading a different firmware
Reply
#3
okay for now no solution
what if i backup a working tecno p9 with miracle will it work
and flash it to this one
Reply
#4
(11-15-2016, 12:24 PM)chikaubah Wrote: okay for now no solution
what if i backup a working tecno p9 with miracle will it work
and flash it to this one

So far its 4.4, its worth a shot
Reply
#5
AM GETTING THE BACKUP BY 10AM ANY PROGRRSS I WILL POST IT HERE AND TRY AND SUBCRIBE AND UPLOAD D ROM
Reply
#6
(11-15-2016, 10:07 PM)chikaubah Wrote: AM GETTING THE BACKUP BY 10AM ANY PROGRRSS I WILL POST IT HERE AND TRY AND SUBCRIBE AND UPLOAD D ROM

Great
Reply
#7
GOOD AFTER NOON SIR THE BACKUP and i flashed with sp,miracle,nck but no luck so far it did not even turn on but thats not what am worried about since i have a backup is there any way i can like take some files from this backup rom and replace to the rom not charging

my question which files are controlling the charging management so this is the backup files i have now


BOOTING
CAUCHE
EBR1
EBR2
LOGO
MBR
SCATTER FILE
PRELOADER
RECOVERY
SECRO
SYSTEM
UBOOT
USERDATA



WHAT FILES CAN I TRY AND COPY TO THE STOCK TO TEST

Sent from my Infinix HOT 4 using Hovatek mobile
Reply
#8
(11-16-2016, 01:30 PM)chikaubah Wrote: GOOD AFTER NOON SIR THE BACKUP and i flashed with sp,miracle,nck but no luck so far it did not even turn on but thats not what am worried about since i have a backup is there any way i can like take some files from this backup  rom and replace to the rom not charging

my question which files are controlling the charging management so this is the backup files i have now


BOOTING
CAUCHE
EBR1
EBR2
LOGO
MBR
SCATTER FILE
PRELOADER
RECOVERY
SECRO
SYSTEM
UBOOT
USERDATA



WHAT FILES CAN I TRY AND COPY TO THE STOCK TO TEST

Sent from my Infinix HOT 4 using Hovatek mobile

Thats between boot and system
Reply










Users browsing this thread:
1 Guest(s)