Hi, Guest! Login / Register
Giveaway: Free Hovatek T-shirts, Hoodies & Cufflinks.. I WANT ONE! (Nov 25, 2017)
Thread Rating:
  • 2 Vote(s) - 3 Average
  • 1
  • 2
  • 3
  • 4
  • 5

ULTIMATE GUIDE TO UNLOCK E5573s-320 MIFI [LINK UPDATED]

#21

(02-16-2017, 05:05 PM)Nouman.ahsen Wrote: i think the problem is in loader step

Sent from my HM NOTE 1W using the Hovatek Forum App
Model ID mismatch will create errors especially flashing the usloader in Balong Downloader


Reply
#22
any updates sir?

Sent from my HM NOTE 1W using the Hovatek Forum App
Reply
#23
(02-16-2017, 05:06 PM)Nouman.ahsen Wrote: because it takes a second to complete

Sent from my HM NOTE 1W using the Hovatek Forum App

consider using a PC running windows 7
you might encounter difficulties using windows 8 and above
Reply
#24
(02-23-2017, 09:44 PM)X3non Wrote:
(02-16-2017, 05:06 PM)Nouman.ahsen Wrote: because it takes a second to complete

Sent from my HM NOTE 1W using the Hovatek Forum App

consider using a PC running windows 7
you might encounter difficulties using windows 8 and above
I am using windows 7 but the problem is my device doesnt undergo in download mode using balong downloader

Sent from my HM NOTE 1W using the Hovatek Forum App
Reply
#25
(02-25-2017, 07:02 PM)Nouman.ahsen Wrote:
(02-23-2017, 09:44 PM)X3non Wrote:
(02-16-2017, 05:06 PM)Nouman.ahsen Wrote: because it takes a second to complete

Sent from my HM NOTE 1W using the Hovatek Forum App

consider using a PC running windows 7
you might encounter difficulties using windows 8 and above
I am using windows 7 but the problem is my device doesnt undergo in download mode using balong downloader

Sent from my HM NOTE 1W using the Hovatek Forum App
Your problem is strange, this guide works for millions of people without any specific error apart from Resuming User Information which is relatively normal and has no effect to the mifi at all.

Try these

1. Connect the test point with a flexible pin to gnd , then insert USB , you should have pc detection


2. Take screenshot of device manager and post here

3. If not we need to connect one on one via team viewer and USB server
Reply
#26
(02-16-2017, 03:18 PM)Nouman.ahsen Wrote: sir im stuck at finding port

Sent from my HM NOTE 1W using the Hovatek Forum App

hi good day..i did unlock my modem using this instruction...but the problem now is that i cant enter in my webui..i dont know the admin act and passwrd for the webui..thanks..i hope someone can help me
Reply
#27
(11-18-2016, 12:48 PM)droidmobitech Wrote: Hi guys ,

After searching on the net so many times, trying to find a way out to unlock the new modem/mifi on algo code 4

I found my own guide very very powerful

No ALgo code 4 needed

No hash reader needed

No code calculator needed


NB: I WILL POST LINKS LATER FROM MY UPLOADS

WATCH THE PROCESS AND FIX YOUR MIFI
everything is detailed and made easy with pictures



Im using the E5573s-320

REQUIREMENTS
1. BALONG USB DOWNLOADER
2. E5573s-320/606 2.180 FIRMWARE
3. E5573s-320/606 2.11.9 firmware
4. E5573s-320/606 17v web UI - dashboard software-huawei
5. Huawei latest modem drivers v5-mifi drivers
6. Dc unlocker- FREE CLIENT VERSION


nb: you will need both the old and new huawei drivers due to the downgrade and upgrade issues

1. Im using MTN 4g mifi E5573s-320 for the process

[Image: 2yp0pae.jpg]

the Softwares need are shown in here
[Image: izugcp.jpg]

2. lets start, disassemble modem as shown in picture

a. [Image: vgsag.jpg]

We need a pin to shot quickly the boot pin to the usb connector on PCB

b. [Image: jukehs.jpg]


3. Remove sim and battery they are not needed in the process

Now short boot the boot pin, the first pin close to the usb cable connector on PCB as shown, the connect usb cable while holding the connection for detection

After pc detection remove the pin, your connection is now stable for flashing

[Image: fnwkmq.jpg]

[Image: 6paszr.png]

watch for detection

[Image: n21iea.jpg]

detection complete

4. Now extract and run Balong USB downloader as admin

a.
[Image: rss9j5.png]

b.
Click detect as shown in picture, with correct driver, you should see this -below
[Image: 2142mnp.jpg]


NB: You need to download the huawei old and new mifi drivers

c. Now extract the
E5573s-320/606 2.11.9 firmware Now you should see a file called USBLOADER.bin

This is the file that we will flash, at the same time it will unlock your modem

[Image: 1z16as5.jpg]

Now lets flash

[Image: 10fdtw5.png]

[Image: 28vu4av.jpg]

[Image: i737es.jpg]

Now your Modem is unlocked
After flashing the USBLOADER the modem is UNLOCKED


5. Now we will be able to downgrade without any error
a.
[Image: 2dvo5rc.png]

b.

[Image: 2z4cs4o.jpg]

c.

[Image: 4lj2bb.jpg]


6. Now we need to read dashboard to verify imei and WEbUI version

a.
[Image: 69jrjs.jpg]

b.

[Image: 2u41pfl.jpg]

Modem is unlocked

Nothing else needed

c. [Image: 2uh6ant.jpg]
IMEI is written , Now ok

7. Now you see the dashboard version is zeros

[Image: ipaa2r.jpg]

lets flash the WEBUI

[Image: mx0c3b.jpg]

[Image: 2mc6ezo.jpg]

[Image: 1fgy0y.jpg]

Now the webUI IS WRITTEN

8. Now lets upgrade the dashboard again to complete the process

NB Without upgrading the dashboard to 2.180, the mifi may not work properly due to downgrade firmware installed, you will have problems with usage

it is must to upgrade after the above process

[Image: 2cz5vd5.jpg]

[Image: 2s7uw5d.jpg]

Now modem is ready for use

I tested on 2g, 3g and 4g networks all working perfect

[Image: 21m7yg5.jpg]

[Image: 2akfhc2.jpg]

hi good day..i used this method and it did unlock my modem..but the problem now is that i cant log into the webui..do you know whats the dafault username and pass of this
Reply
#28
(03-07-2017, 07:25 AM)skidwel22 Wrote:
(11-18-2016, 12:48 PM)droidmobitech Wrote: Hi guys ,

After searching on the net so many times, trying to find a way out to unlock the new modem/mifi on algo code 4

I found my own guide very very powerful

No ALgo code 4 needed

No hash reader needed

No code calculator needed


NB: I WILL POST LINKS LATER FROM MY UPLOADS

WATCH THE PROCESS AND FIX YOUR MIFI
everything is detailed and made easy with pictures



Im using the E5573s-320

REQUIREMENTS
1. BALONG USB DOWNLOADER
2. E5573s-320/606 2.180 FIRMWARE
3. E5573s-320/606 2.11.9 firmware
4. E5573s-320/606 17v web UI - dashboard software-huawei
5. Huawei latest modem drivers v5-mifi drivers
6. Dc unlocker- FREE CLIENT VERSION


nb: you will need both the old and new huawei drivers due to the downgrade and upgrade issues

1. Im using MTN 4g mifi E5573s-320 for the process

[Image: 2yp0pae.jpg]

the Softwares need are shown in here
[Image: izugcp.jpg]

2. lets start, disassemble modem as shown in picture

a. [Image: vgsag.jpg]

We need a pin to shot quickly the boot pin to the usb connector on PCB

b. [Image: jukehs.jpg]


3. Remove sim and battery they are not needed in the process

Now short boot the boot pin, the first pin close to the usb cable connector on PCB as shown, the connect usb cable while holding the connection for detection

After pc detection remove the pin, your connection is now stable for flashing

[Image: fnwkmq.jpg]

[Image: 6paszr.png]

watch for detection

[Image: n21iea.jpg]

detection complete

4. Now extract and run Balong USB downloader as admin

a.
[Image: rss9j5.png]

b.
Click detect as shown in picture, with correct driver, you should see this -below
[Image: 2142mnp.jpg]


NB: You need to download the huawei old and new mifi drivers

c. Now extract the
E5573s-320/606 2.11.9 firmware Now you should see a file called USBLOADER.bin

This is the file that we will flash, at the same time it will unlock your modem

[Image: 1z16as5.jpg]

Now lets flash

[Image: 10fdtw5.png]

[Image: 28vu4av.jpg]

[Image: i737es.jpg]

Now your Modem is unlocked
After flashing the USBLOADER the modem is UNLOCKED


5. Now we will be able to downgrade without any error
a.
[Image: 2dvo5rc.png]

b.

[Image: 2z4cs4o.jpg]

c.

[Image: 4lj2bb.jpg]


6. Now we need to read dashboard to verify imei and WEbUI version

a.
[Image: 69jrjs.jpg]

b.

[Image: 2u41pfl.jpg]

Modem is unlocked

Nothing else needed

c. [Image: 2uh6ant.jpg]
IMEI is written , Now ok

7. Now you see the dashboard version is zeros

[Image: ipaa2r.jpg]

lets flash the WEBUI

[Image: mx0c3b.jpg]

[Image: 2mc6ezo.jpg]

[Image: 1fgy0y.jpg]

Now the webUI IS WRITTEN

8. Now lets upgrade the dashboard again to complete the process

NB Without upgrading the dashboard to 2.180, the mifi may not work properly due to downgrade firmware installed, you will have problems with usage

it is must to upgrade after the above process

[Image: 2cz5vd5.jpg]

[Image: 2s7uw5d.jpg]

Now modem is ready for use

I tested on 2g, 3g and 4g networks all working perfect

[Image: 21m7yg5.jpg]

[Image: 2akfhc2.jpg]

hi good day..i used this method and it did unlock my modem..but the problem now is that i cant log into the webui..do you know whats the dafault username and pass of this
Type without quotes "admin" as username and password
Reply
#29
Please do not reply to the Main thread, just post your comments as normal post below


Please DON'T REPLY THE MAIN THREAD

it makes reading difficult......

It makes reading difficult.....
Reply
#30
how can i unlock my mifi device ALM-N820 model?
Reply










Users browsing this thread:
2 Guest(s)