11-24-2016, 01:36 PM
(11-24-2016, 09:39 AM)jossy Wrote: One moth past since i bought this phone.
I used sp flash tool v5.1640 in flashing.
I will advise you according to my experience on my Hisense U989 Pro device with chipset MT6580 that I formatted using the sp flashtool and it never booted and the battery never charged after that.I used Miracle Box v2.27a that I used to backup the unrooted stock rom of my device.All the files from that backup were in .bin format and none of them were in .img format. I will suggest that you copy the original folder of your firmware that you have to another location and rename the files with .img format to .bin format but leave their original names e.g change boot.img to boot.bin.Open Miracle Box loader from the miracle box folder you downloaded and extracted.Once miracle box opens click on mtk tab first then click on 'write' then choose the chipset of your device e.g mine is MT6580 but on miracle box it shows MT65xx.After you chose chipset of your device go down to where you see the folder icon with blank column next to it.Click on that folder and browse to where you copied your rom firmware with renamed files and choose a scatter. txt there.Then go down to start button and click it.The left window of your miracle box will show that it is waiting for your device. All that is mentioned above is done before you connect your device.Then switch off your device and connect to your pc with its usb cable.Once you connect it a window will pop up with all the files in that folder where you chose your scatter file.All those files will have ticks next to them.Just click ok on that pop up window.Then your pc with flash all those files in your firmware folder.Wait till it is finish and it will say 'Done' at the end when finished.Then disconnect your device and switch it on. All done.I don't say it will work.It is just to try.It worked on my phone but our phones are different
Sent from my Hisense U989 Pro using Hovatek mobile