Hi, Guest! Login / Register




Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

[Please help] Illegitimate privacy protection password = "non theft code" in miracle box

#1
Question 

So here the situation

I have a Jiayu s3, with a custom rom. 4.4 lolipop. 
Its an mtk52** (might be wrong number from the top of my head).
The screen broke and i replaced it. Didnt fasten it properly.
When I opened it up to re-connect the screen connector it suddenly gives me:
Please enter privacy protection password.
There is no such password set.
The bypass says: non theft code.
When trying to read the anti theft it says: port err. port be occupied.

I dont understand.
The anti theft feature is tripped but never installed. And even the miracle box seems to agree. Can anyone help me? I did manage to start sub debug, does that mean i can somehow acces my data? Ive already found a way to flash it but i loose all my data which would be a little bit of a disaster.


So please help, thank you in advance.


Reply
#2
(11-23-2016, 01:40 PM)keescopyright Wrote: So here the situation

I have a Jiayu s3, with a custom rom. 4.4 lolipop. 
Its an mtk52** (might be wrong number from the top of my head).
The screen broke and i replaced it. Didnt fasten it properly.
When I opened it up to re-connect the screen connector it suddenly gives me:
Please enter privacy protection password.
There is no such password set.
The bypass says: non theft code.
When trying to read the anti theft it says: port err. port be occupied.

I dont understand.
The anti theft feature is tripped but never installed. And even the miracle box seems to agree. Can anyone help me? I did manage to start sub debug, does that mean i can somehow acces my data? Ive already found a way to flash it but i loose all my data which would be a little bit of a disaster.


So please help, thank you in advance.

when using Miracle Box, which option did you select to bypass Privacy protection?
Need further assistance? Speak with a Hovatek Representative:
Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)
Reply
#3
On mtk tab on unlock/fix sub-tab select clear antitheft then start and connect phone, wait untill done, thats all, in some phones you wil be required to do a factory reset in recovery after clear antitheft

Sent from my TECNO W4 using Hovatek mobile
Reply
#4
Have you tried format auto with miracle box?

Sent from my TECNO W4 using Hovatek mobile
Reply
#5
(11-23-2016, 08:08 PM)hovatek Wrote: when using Miracle Box, which option did you select to bypass Privacy protection?

I tried the  unlock/fix sub-tab clear antitheft. It worked at least once but then all the data was gone so I restored the faulty backup.

(11-24-2016, 06:26 AM)jospah prezz Wrote: On mtk tab on unlock/fix sub-tab select clear antitheft then start and connect phone, wait untill done, thats all, in some phones you wil be required to do a factory reset in recovery after clear antitheft

Sent from my TECNO W4 using Hovatek mobile

Yes i got this to work, but the data! I need the data! Can i get there some other way? USB debug or something?

(11-24-2016, 11:06 AM)jospah prezz Wrote: Have you tried format auto with miracle box?

Sent from my TECNO W4 using Hova

I havent tried it, but wont it format the data aswel?
Reply
#6
BUMP please! HELP! dont make me beg...
Reply
#7
(11-24-2016, 03:54 PM)keescopyright Wrote: I tried the  unlock/fix sub-tab clear antitheft. It worked at least once but then all the data was gone so I restored the faulty backup.
I havent tried it, but wont it format the data aswel?

I'm afraid your only two options are to either format the phone using the firmware or use this Anti-theft method.
Need further assistance? Speak with a Hovatek Representative:
Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)
Reply










Users browsing this thread:
1 Guest(s)