Hi, Guest! Login / Register




Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Tecno y4 dead solution

#1

Please I'm trying to flash tecno y4 it unfortunately dead no On +no charging+no detect by my pc please I need solution to Unbrick the phone

Sent from my Infinix NOTE 3 using Hovatek mobile


Reply
#2
(11-29-2016, 09:03 PM)olorispecial Wrote: Please I'm trying to flash tecno y4 it unfortunately dead no On +no charging+no detect by my pc please I need solution to Unbrick the phone

Sent from my Infinix NOTE 3 using Hovatek mobile

1. How did it go dead?
2. Where did you get the firmware you flashed from?
3. Take out the battery, charge externally, reinsert then try flashing again
Need further assistance? Speak with a Hovatek Representative:

Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)

Request for Private Support
* Install the Hovatek Forum app
* Listen to H-Tech Radio
* Helpline: +2348021840309
* Email: [email protected]
* Skype: Hovatek
Reply
#3
(This post was last modified: 11-30-2016, 11:59 AM by olorispecial. )
From hovatek site I downloaded the firmware

Sent from my Infinix NOTE 3 using Hovatek mobile
Reply
#4
(11-30-2016, 11:58 AM)olorispecial Wrote: From hovatek site I downloaded the firmware

Sent from my Infinix NOTE 3 using Hovatek mobile

Try option 3 in my previous reply before we consider the Jumper @ https://forum.hovatek.com/thread-11802.html
Need further assistance? Speak with a Hovatek Representative:

Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)

Request for Private Support
* Install the Hovatek Forum app
* Listen to H-Tech Radio
* Helpline: +2348021840309
* Email: [email protected]
* Skype: Hovatek
Reply
#5
I have tried all the solution I got here....but still drop.....
Is writing Brom error :S_DL_GET_DRAM_SETTING_FAIL(5054) almost 4 different y4 scatter file I used to flash it its still write the same thing please help me

Sent from my Infinix NOTE 3 using Hovatek mobile
Reply
#6
(12-02-2016, 02:12 PM)olorispecial Wrote: I have tried all the solution I got here....but still drop.....
Is writing Brom error :S_DL_GET_DRAM_SETTING_FAIL(5054) almost 4 different y4 scatter file I used to flash it its still write the same thing please help me

Sent from my Infinix NOTE 3 using Hovatek mobile

Error 5054 is a mismatch error, refer to https://forum.hovatek.com/thread-439.html
Means there's some kind of incompatibility
I need you to attach a full screenshot of the error message for each firmware you tried
Need further assistance? Speak with a Hovatek Representative:

Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)

Request for Private Support
* Install the Hovatek Forum app
* Listen to H-Tech Radio
* Helpline: +2348021840309
* Email: [email protected]
* Skype: Hovatek
Reply
#7
[Image: b6a9182d81011bce21bb9492226bdb34.jpg]

Sent from my Infinix NOTE 3 using the Hovatek Forum App
Reply
#8
(This post was last modified: 03-14-2017, 08:45 PM by olorispecial. )
IMG] https://uploads.tapatalk-cdn.com/2017031...838e8c.jpg[/IMG]

Sent from my Infinix NOTE 3 using Hovatek mobile
Reply
#9
(03-14-2017, 08:42 PM)olorispecial Wrote: .

Sent from my Infinix NOTE 3 using the Hovatek Forum App

The screenshot shows something weird
Did you modify the scatter file?
Need further assistance? Speak with a Hovatek Representative:

Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)

Request for Private Support
* Install the Hovatek Forum app
* Listen to H-Tech Radio
* Helpline: +2348021840309
* Email: [email protected]
* Skype: Hovatek
Reply
#10
No I don't modify anything

Sent from my Infinix NOTE 3 using Hovatek mobile
Reply










Users browsing this thread:
1 Guest(s)