Please help
Please help
(05-12-2016, 11:42 PM)Temitope91 Can I fix hard brick by changing emmc
Sent from my Fire2 3G using Hovatek mobile
(06-12-2016, 12:06 PM)hovatek(05-12-2016, 11:42 PM)Temitope91 Can I fix hard brick by changing emmc
Sent from my Fire2 3G using Hovatek mobile
Not in all cases.
It depends on the circumstances surrounding the bricking.
more information would help
(06-12-2016, 01:43 PM)Temitope91 I have a tecno p6 which is or was hard bricked before but is now been defected by my PC as mtk USB port if I try to flash am always getting dis dram error or so have tried different post but still d same. But sometimes I can just decided to try and flash it after continuous trying den it won't show any error it will connect as mtk usb port den change to mtk da ......... And flash 100% download ok but won't on or vib still later if I try it again it will start with dram error again. Then I notice anytime I try to flash it if I click on download (sp flash tool) and connect d phone it will connect as mtk USB port if it remains as mtk USB port or the com port don't change like (com14) it won't flash but if it change it will flash but won't on , vib or show any sign that it flash at all. THANKS
Sent from my Fire2 3G using Hovatek mobile
(07-12-2016, 03:38 PM)hovatek(06-12-2016, 01:43 PM)Temitope91 I have a tecno p6 which is or was hard bricked before but is now been defected by my PC as mtk USB port if I try to flash am always getting dis dram error or so have tried different post but still d same. But sometimes I can just decided to try and flash it after continuous trying den it won't show any error it will connect as mtk usb port den change to mtk da ......... And flash 100% download ok but won't on or vib still later if I try it again it will start with dram error again. Then I notice anytime I try to flash it if I click on download (sp flash tool) and connect d phone it will connect as mtk USB port if it remains as mtk USB port or the com port don't change like (com14) it won't flash but if it change it will flash but won't on , vib or show any sign that it flash at all. THANKS
Sent from my Fire2 3G using Hovatek mobile
This sounds like a power issue.
have you tried a different battery on the device?
(07-12-2016, 05:18 PM)Temitope91 Yes i have i even bought a new battery and boost it wit destop till it was full and tried it did not on.
Sent from my Fire2 3G using Hovatek mobile
(08-12-2016, 08:51 AM)hovatek(07-12-2016, 05:18 PM)Temitope91 Yes i have i even bought a new battery and boost it wit destop till it was full and tried it did not on.
Sent from my Fire2 3G using Hovatek mobile
OK. Means we're looking at a preloader issue.
We currently have just one P6 firmware. You'll need a different one (we're on it) or a working phone to backup.
(29-12-2016, 10:32 PM)Temitope91 It was working normal kind of but sumtimes it would off by its self while sumtimes if I remove d battery and plug it to charge it won't charge instead it will be connecting to d system as mtk ..... As if I won't to flash it so when it on I rebooted into recovery I and a custom recovery and tried to wipe cache but it did not wipe it just hanged so I removed d battery and ever since then it as not been able to on. And have stated the problem its given me in my earlier reply this was wat happen before it got bricked. Thanks
Sent from my Fire2 3G using Hovatek mobile