Hovatek Forum MOBILE Android [Please help] INFINIX X551 CLONE DEAD
Try our Online TWRP Builder..its free!
Can't login? Please, reset your password.


[Please help] INFINIX X551 CLONE DEAD

[Please help] INFINIX X551 CLONE DEAD

chikaubah
chikaubah
chikaubah
Senior Member
216
07-12-2016, 05:20 PM
#1



HELLO FRIENDS GOOD DAY TP YOUU I AM IN A BIG TROUBLE 

I MISTAKENLY FLASHED AN ORIGINAL INFINIX X551 ON THE CLONE VERSION BOTH DEVICE 16+1 

I LATER DOWNLOADED THE CLONE ROM BUT WHEN I WANT TO FLASH IT THROUGH SP FLASH TOOL IT GIVES THIS ERROR S_FT_ENABLE_DRAM_FAIL (0xFC0) 

WHEN I TRY MIRACLE BOX IT GIVES >>ERR21002.00
THEN NCK MTK DONGLE GIVES THIS ERROR
 Action : Format Full Except Preloader.
 Selected 0-By CPUM 0-By CPUMT6571_EMMC
 Exe version: NCKDongle AndroidMTK 2.5.6.2
 Reinsert phone battery. 
 Battery must be charged.
 Phone must be off with battery inside. 
 Please insert USB cable now...
 Detected : MTK USB Port (COM28)
 Phone detected...Please wait
 Sending DA agent, please wait...
 BBCHIP MT6580_S00
 Connect error[4032]: S_FT_ENABLE_DRAM_FAIL
 Boot Fail.!!!.
 All done. PLZ HELP ME IT DETECTECT BUT WONT FLASH
hovatek
hovatek
hovatek
Administrator
49,570
08-12-2016, 08:55 AM
#2
(07-12-2016, 05:20 PM)chikaubah HELLO FRIENDS GOOD DAY TP YOUU I AM IN A BIG TROUBLE 

I MISTAKENLY FLASHED AN ORIGINAL INFINIX X551 ON THE CLONE VERSION BOTH DEVICE 16+1 

I LATER DOWNLOADED THE CLONE ROM BUT WHEN I WANT TO FLASH IT THROUGH SP FLASH TOOL IT GIVES THIS ERROR S_FT_ENABLE_DRAM_FAIL (0xFC0) 

WHEN I TRY MIRACLE BOX IT GIVES >>ERR21002.00
THEN NCK MTK DONGLE GIVES THIS ERROR
 Action : Format Full Except Preloader.
 Selected 0-By CPUM 0-By CPUMT6571_EMMC
 Exe version: NCKDongle AndroidMTK 2.5.6.2
 Reinsert phone battery. 
 Battery must be charged.
 Phone must be off with battery inside. 
 Please insert USB cable now...
 Detected : MTK USB Port (COM28)
 Phone detected...Please wait
 Sending DA agent, please wait...
 BBCHIP MT6580_S00
 Connect error[4032]: S_FT_ENABLE_DRAM_FAIL
 Boot Fail.!!!.
 All done. PLZ HELP ME IT DETECTECT BUT WONT FLASH

error 4032 is a mismatch error ( https://www.hovatek.com/forum/thread-439.html )
The Clone firmware isn't compatible with the device.
How did you discover that its a clone?

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.
chikaubah
chikaubah
chikaubah
Senior Member
216
09-12-2016, 09:46 AM
#3
the camera flash the panel the batter fled plug the touch screen is a flat fled instead of plug the panel design is different from original the way they wrote the hote note is in italics
chikaubah
chikaubah
chikaubah
Senior Member
216
09-12-2016, 09:50 AM
#4
i have tried bridging kcolo with gnd but still yet no go
hovatek
hovatek
hovatek
Administrator
49,570
09-12-2016, 02:24 PM
#5



(09-12-2016, 09:46 AM)chikaubah the camera flash the panel the batter fled plug the touch screen is a flat fled instead of plug the panel design is different from original the way they wrote the hote note is in italics

(09-12-2016, 09:50 AM)chikaubah i have tried bridging kcolo with gnd but still yet no go

Its scary to know that clones might also have variants.
I need to ask, when you flashed the original, did you get the 100% OK? Also, how did the device behave?

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.
apara
apara
apara
Senior Member
205
09-12-2016, 10:05 PM
#6
(09-12-2016, 02:24 PM)hovatek
(09-12-2016, 09:46 AM)chikaubah the camera flash the panel the batter fled plug the touch screen is a flat fled instead of plug the panel design is different from original the way they wrote the hote note is in italics

(09-12-2016, 09:50 AM)chikaubah i have tried bridging kcolo with gnd but still yet no go

Its scary to know that clones might also have variants.
I need to ask, when you flashed the original, did you get the 100% OK? Also, how did the device behave?

Bro x551 clone got like 3 to 4 variants ....does your own show "xui" animation?.....I think its not flashing because you don't have the correct preloader on the phone...try flashing on preloader using that nck....I have a related issue last week but thank God I keep a back up of the clone 551...that's what really save my ***
This post was last modified: 09-12-2016, 10:09 PM by apara.
chikaubah
chikaubah
chikaubah
Senior Member
216
11-12-2016, 12:46 PM
#7
MY X551 CLONE IS NON REMOVABLE BATTERY AND I WILL TRY AND FIND OTHER ROM

Sent from my Infinix HOT 4 using Hovatek mobile
chikaubah
chikaubah
chikaubah
Senior Member
216
19-12-2016, 09:48 PM
#8
can this get anymore worse i borrow another working clone which is the same build i mean the exact version but when am trying to back the phone with miracle it back up to an extent and give a error that say (port error) please i have tried several tool se pros

Sent from my Infinix HOT 4 using Hovatek mobile
hovatek
hovatek
hovatek
Administrator
49,570
20-12-2016, 12:28 PM
#9
(19-12-2016, 09:48 PM)chikaubah can this get anymore worse i borrow another working clone which is the same build i mean the exact version but when am trying to back the phone with miracle it back up to an extent and give a error that say (port error) please i have tried several tool se pros

Sent from my Infinix HOT 4 using Hovatek mobile

uninstall all MTK drivers using USB deview then reinstall VCOM drivers and ADB drivers ( https://www.hovatek.com/forum/thread-588.html )

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)
YtWhTl
live chat
whatsapp telegram instagram