[Please help] My Tecno W3 Issues with Android Tools
[Please help] My Tecno W3 Issues with Android Tools
(09-12-2016, 02:02 AM)mjamal My phone: Tecno W3 (MT6580) w\ Android 6
PC's OS: Windows 7 Ultimate w\ SP1 (64-bit)
Drivers installed: Phone, ADB and All of MTK USB VCOM Drivers (Preloader, DA, .....)
Android tools my phone've issues w\: MTK Droid Tools [latest & others], SP Flash Tool [latest & others] & Miracle Box 2.27a w\ Loader [All of the setup processes done by following Hovatek Tutorials exactly]
1st) Issues with MTK Droid Tools: My Phone rooted or not always got this messange {
--- ERROR : --- TotalBytesPerChunk Not Found. Set default Page/Spare=2048/64 !!!
--- Unknown ROM structure, backup NOT possible!
} I followed the solutions of Hovatek's Issues Meanings and Solutions page of MTK Droid Tools and no way I can take my phone's scatter file format.
2nd) So I tried the scatters I've in reading back using SP Flash Tool I've 2 scatter files 1 from Hovatek's TWRP ported for Tecno W3 and the other from backup I downloaded of similar build number of my country (Egypt) and I flash it including the Preloader bin file without facing any problem so I followed Hovatek's dumping my ROM partition by partition I've no problem with readingback but when loading scatter file for download the preloader bin file can't be loaded and I got this message {
Please check the load image file is correct or not?
} the preloader size in the two scatters I've is the same 0x40000 after converting it 4 MBytes whenever I replaced it with other one which much smaller just 117 KBytes it works great!
NOTE 1: The backup I've was taken by Chinese Miracle II Dongle by Infinity Team I've no problems downloading it with SP Flash Tool sure without loading NVRAM or formatting my phone.
NOTE 2: I revised the two scatters and they are the same except the part of "flashinfo" both address and size are different.
3rd) Miracle Box 2.27a + loader doesn't want to catch my phone's USB Port with all solutions I tried always got {
non usbport was detected make sure that the drivers are installed.
} something like that!
Finally, Thanks for your efforts HOVATEK Team and Sorry, If I wrote too much.
(09-12-2016, 01:53 PM)hovatek(09-12-2016, 02:02 AM)mjamal My phone: Tecno W3 (MT6580) w\ Android 6
PC's OS: Windows 7 Ultimate w\ SP1 (64-bit)
Drivers installed: Phone, ADB and All of MTK USB VCOM Drivers (Preloader, DA, .....)
Android tools my phone've issues w\: MTK Droid Tools [latest & others], SP Flash Tool [latest & others] & Miracle Box 2.27a w\ Loader [All of the setup processes done by following Hovatek Tutorials exactly]
1st) Issues with MTK Droid Tools: My Phone rooted or not always got this messange {
--- ERROR : --- TotalBytesPerChunk Not Found. Set default Page/Spare=2048/64 !!!
--- Unknown ROM structure, backup NOT possible!
} I followed the solutions of Hovatek's Issues Meanings and Solutions page of MTK Droid Tools and no way I can take my phone's scatter file format.
2nd) So I tried the scatters I've in reading back using SP Flash Tool I've 2 scatter files 1 from Hovatek's TWRP ported for Tecno W3 and the other from backup I downloaded of similar build number of my country (Egypt) and I flash it including the Preloader bin file without facing any problem so I followed Hovatek's dumping my ROM partition by partition I've no problem with readingback but when loading scatter file for download the preloader bin file can't be loaded and I got this message {
Please check the load image file is correct or not?
} the preloader size in the two scatters I've is the same 0x40000 after converting it 4 MBytes whenever I replaced it with other one which much smaller just 117 KBytes it works great!
NOTE 1: The backup I've was taken by Chinese Miracle II Dongle by Infinity Team I've no problems downloading it with SP Flash Tool sure without loading NVRAM or formatting my phone.
NOTE 2: I revised the two scatters and they are the same except the part of "flashinfo" both address and size are different.
3rd) Miracle Box 2.27a + loader doesn't want to catch my phone's USB Port with all solutions I tried always got {
non usbport was detected make sure that the drivers are installed.
} something like that!
Finally, Thanks for your efforts HOVATEK Team and Sorry, If I wrote too much.
1. Forget MTK Droid tools,it won't work.
2. During SP flash tool readback, what were the values for start and lenght you entered?
3. Attach both scatter files
(09-12-2016, 01:53 PM)hovatek(09-12-2016, 02:02 AM)mjamal My phone: Tecno W3 (MT6580) w\ Android 6
PC's OS: Windows 7 Ultimate w\ SP1 (64-bit)
Drivers installed: Phone, ADB and All of MTK USB VCOM Drivers (Preloader, DA, .....)
Android tools my phone've issues w\: MTK Droid Tools [latest & others], SP Flash Tool [latest & others] & Miracle Box 2.27a w\ Loader [All of the setup processes done by following Hovatek Tutorials exactly]
1st) Issues with MTK Droid Tools: My Phone rooted or not always got this messange {
--- ERROR : --- TotalBytesPerChunk Not Found. Set default Page/Spare=2048/64 !!!
--- Unknown ROM structure, backup NOT possible!
} I followed the solutions of Hovatek's Issues Meanings and Solutions page of MTK Droid Tools and no way I can take my phone's scatter file format.
2nd) So I tried the scatters I've in reading back using SP Flash Tool I've 2 scatter files 1 from Hovatek's TWRP ported for Tecno W3 and the other from backup I downloaded of similar build number of my country (Egypt) and I flash it including the Preloader bin file without facing any problem so I followed Hovatek's dumping my ROM partition by partition I've no problem with readingback but when loading scatter file for download the preloader bin file can't be loaded and I got this message {
Please check the load image file is correct or not?
} the preloader size in the two scatters I've is the same 0x40000 after converting it 4 MBytes whenever I replaced it with other one which much smaller just 117 KBytes it works great!
NOTE 1: The backup I've was taken by Chinese Miracle II Dongle by Infinity Team I've no problems downloading it with SP Flash Tool sure without loading NVRAM or formatting my phone.
NOTE 2: I revised the two scatters and they are the same except the part of "flashinfo" both address and size are different.
3rd) Miracle Box 2.27a + loader doesn't want to catch my phone's USB Port with all solutions I tried always got {
non usbport was detected make sure that the drivers are installed.
} something like that!
Finally, Thanks for your efforts HOVATEK Team and Sorry, If I wrote too much.
1. Forget MTK Droid tools,it won't work.
2. During SP flash tool readback, what were the values for start and lenght you entered?
3. Attach both scatter files
(09-12-2016, 11:41 PM)mjamal *My reply in post #3 I attached the files to it...
(10-12-2016, 10:14 PM)hovatek(09-12-2016, 11:41 PM)mjamal *My reply in post #3 I attached the files to it...
Both scatter files seem OK.
Miracle Box 2.27a + Loader ought to work with your W3, I've personally confirmed that .
Just to be clear, what are you trying to achieve?
(10-12-2016, 11:06 PM)mjamal I want to read my phone's current updated firmware for future use and offcource the NVRAM.
Miracle doesn't catch my phone's USB port always searching for USB port!!!
(11-12-2016, 12:49 PM)hovatek(10-12-2016, 11:06 PM)mjamal I want to read my phone's current updated firmware for future use and offcource the NVRAM.
Miracle doesn't catch my phone's USB port always searching for USB port!!!
What If I ported TWRP for you to do the backup pending when we're able to get Miracle box to work?
Also, have you tried using the box (not crack)?
(11-12-2016, 01:28 PM)mjamal I already have a backup done by TWRP ported for Tecno W3. In the present time the box isn't an option for me.
I can't use this backup format from TWRP with SP Flash Scatter format?!