Hi, Guest! Login / Register
Giveaway: Free Hovatek T-shirts, Hoodies & Cufflinks.. I WANT ONE! (Nov 25, 2017)
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

[Please help] BV6000 Hard Bricked

#1

Hi all, yesterday i tried to flash my Blackview BV6000 with the "20160608_s12v55_jk_3m" Rom (which i downloaded from the official site), so i loaded the scatter file in SP FlashTool (v5.1620), checked all files (with the "download only" active), turned off the phone, plugged it to the PC (Win 7 ultimate x64) to install it with the "Mediatek USB VCOM(Android)" driver, unplugged, prepared the SP FlashTool (download), plugged the phone and the flash process went fine (Download OK mark), but when i tried to turn on the phone, simply wont turn on, so i left it charging for the rest of the night, but no use, it wont start and the PC won't recognize it anymore, so after a few hours searching on the internet, came across the MTK "META mode", so i tried to go through all the process in this mode (as it's the only way the computer will recognize it), but the problem is that SP Flashtool loads the starting red bar, but it won't continue, and the phone disconnects from the PC, after that gives me the BROM ERROR: STATUS_EXT_RAM_EXCEPTION (0xC0050005)..

Tried on different ports, tried on my GF computer (Win 8 Pro x64), same results..

Please Help :'(


Reply
#2
(12-10-2016, 11:18 PM)Harstock Wrote: Hi all, yesterday i tried to flash my Blackview BV6000 with the "20160608_s12v55_jk_3m" Rom (which i downloaded from the official site), so i loaded the scatter file in SP FlashTool (v5.1620), checked all files (with the "download only" active), turned off the phone, plugged it to the PC (Win 7 ultimate x64) to install it with the "Mediatek USB VCOM(Android)" driver, unplugged, prepared the SP FlashTool (download), plugged the phone and the flash process went fine (Download OK mark), but when i tried to turn on the phone, simply wont turn on, so i left it charging for the rest of the night, but no use, it wont start and the PC won't recognize it anymore, so after a few hours searching on the internet, came across the MTK "META mode", so i tried to go through all the process in this mode (as it's the only way the computer will recognize it), but the problem is that SP Flashtool loads the starting red bar, but it won't continue, and the phone disconnects from the PC, after that gives me the BROM ERROR: STATUS_EXT_RAM_EXCEPTION (0xC0050005)..

Tried on different ports, tried on my GF computer (Win 8 Pro x64), same results..

Please Help :'(

lets put this Meta Mode you're trying aside for now.
retry flashing the firmware as directed @ https://forum.hovatek.com/thread-159.html
let me know if its successful with 100% OK
Need further assistance? Speak with a Hovatek Representative:
Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)
Reply










Users browsing this thread:
1 Guest(s)