[Please help] Gionee M6 Stuck in Recovery Mode
[Please help] Gionee M6 Stuck in Recovery Mode
(20-03-2017, 09:46 AM)hovatek(19-03-2017, 09:09 AM)herziz07 Thanks, I patiently await the update, but if by any chance I get the firmware from a working gionee m6 phone, I will update as well.
Thanks.
We've listed 2 Gionee M6 firmware @ https://www.hovatek.com/forum/thread-389.html
The first one doesn't contain a system.img . The second is likely a higher Build compared to yours. Someone (lower build) who tried it said it bricked his phone. If you must try the second (with system) then untick all other partitions and tick only Android (system.img)
(23-03-2017, 01:33 PM)herziz07 My gionee m6 is completely stuck in recovery, with android icon lying on its back and says no command, I can't boot in recovery or bootloader. please kindly help out please.
(23-03-2017, 09:43 PM)hovatek(23-03-2017, 01:33 PM)herziz07 My gionee m6 is completely stuck in recovery, with android icon lying on its back and says no command, I can't boot in recovery or bootloader. please kindly help out please.
This is going to be a challenging one but we'll go ahead anyway.
Download the MT6755 scatter file @ https://www.hovatek.com/forum/thread-12724.html
you're going to attempt a readback using SP flash tool @ https://www.hovatek.com/forum/thread-526.html
I'll guide you through the process, just let me know once scatter file is downloaded
(04-04-2017, 06:21 PM)herziz07 I have the scatter file downloaded already.
(04-04-2017, 08:34 PM)hovatek(04-04-2017, 06:21 PM)herziz07 I have the scatter file downloaded already.
Now, using the guide @ https://www.hovatek.com/forum/thread-526.html , dump recovery.img and boot.img seprarately.
Skip the MTK Droid tools part, you already have the scatter file
Get the start & length values you need (for recovery and boot) from the scatter file
linear_start_addr = physical_start_addr = start
partition_size length
(08-04-2017, 08:50 AM)herziz07 I still get brom error of send_da_fail, see attached the error.
(08-04-2017, 04:19 PM)hovatek(08-04-2017, 08:50 AM)herziz07 I still get brom error of send_da_fail, see attached the error.
Hmm.. What version of SP Flash tool is that?
Also, you need to try to get the phone into fastboot. Try different button combos
(08-04-2017, 08:50 AM)herziz07 SP_Flash_Tool_v5.1708, this is the version of SP flash tool.
Getting the phone into fastboot has been difficult. I will try and update back.